Panduit IUC6C04ABL-CEG CAT 6 Cable 仕様ガイド
www.panduit.com
s p e c i f i c a t i o n s
Category 6 U/UTP copper cable shall meet or exceed the
IEC 61156-6 and ANSI/TIA-568-C.2 Category 6 standards
up to 80 meters. The stranded copper conductors shall be
24/7 AWG with high density polyethylene (HDPE) insulation.
The copper conductors shall be twisted in pairs. All pairs
shall be separated by a divider and then be surrounded
by a PVC jacket. The jacket shall be oil, UV, and abrasion
resistant for enhanced chemical resistance and mechanical
performance. The jacket shall be flame retardant (CM) for
industrial Ethernet applications.
IndustrialNet
™
Category 6 U/UTP
Copper Cable
S P E C I F I C A T I O N S H E E T
a p p l i c a t i o n s
t e c h n i c a l i n f o r m a t i o n
Electrical performance:
Certified component performance up to 80 meters and exceeds
the requirements IEC 61156-6 and ANSI/TIA-568-C.2 Category 6
at swept frequencies up to 250 MHz
Standard compliances:
SUN RES OIL RES II (UL1581 Section 480 and 1200)
Conductors/insulators:
Four pairs of 24/7 AWG stranded copper insulated with high
density polyethylene (HDPE) insulation
Insulation diameter:
0.97 – 1.07mm (0.038 – 0.042 in.)
Flame rating:
CM (UL1685)
Installation tension:
110 N (25 lbf) maximum
Temperature rating:
-20°C to 75°C (-4°F to 167°F) during transport, installation,
and operation
Cable jacket:
Flame retardant PVC, oil, UV, and abrasion resistant
Cable diameter:
6.8mm (0.268 in.) nominal
Cable weight:
26 kg/305m (58 lbs. /1000 ft.)
Packaging:
Packaged 305 meters (1000 feet) on a reel
Package tested to ISTA Procedure 1A
k e y f e a t u r e s a n d b e n e f i t s
Third party tested
Cable has been tested by an independent laboratory and complies
with the electrical standard requirements of IEC 61156-6 and
ANSI/TIA-568-C.2 Category 6 standards
Reliability
Stranded conductors for standard flex applications and ease of
installation; cable jacket shall be oil, UV, and abrasion resistant
for enhanced chemical resistance and mechanical performance
Descending length
cable markings
Easy identification of remaining cable reduces installation time
and cable scrap
Packaged on a reel
Ensures proper performance and provides quick installation
IndustrialNet
™
Category 6 U/UTP
Copper Cable
CM 4-pair/
color Black:
IUC6C04ABL-CEG
IndustrialNet
™
Category 6/5e
RJ45 Field Terminable Plug
Field
terminable plug: ISPS688FAS
IndustrialNet
™
Category 5e
Shielded 600 V-Rated Patch Cords
CM/CMX:
*ISTPHCH1MTL
IndustrialNet
™
M12 D-Code to
RJ45 Panel Mount Adapter
Panel
mount adapter: ICAM12DRJS
Mini-Com
®
Modular Patch Panel
8-port:
CDPP8RG
DIN Rail Adapter
1-port:
CADIN1IW**
*For other lengths, change the length
designation (1M) of the part number to
the desired length (0.3M, 0.6M, 2M, 3M,
5M, or 10M); to designate color, replace
TL (Teal) suffix with BL (Black), RD (Red),
or YL (Yellow). For example, the part
number for a 2-meter teal patch cord
is ISTPHCH2MTL.
**For standard colors other than Off White,
replace IW in part number with BL (Black),
EI (Electric Ivory), IG (International Gray),
or WH (White).
IndustrialNet
™
Category 6 U/UTP Copper
Cable provides reliability and high performance
as an integral component of the end-to-end
solution for industrial Ethernet and Ethernet/IP
based communications networks. Category 6
performance ensures added performance
headroom. The 4-pair high performance cable
ensures highest availability in conditions seen
in industrial environments. The cable
incorporates a durable PVC jacket and is oil,
UV, and abrasion resistant.
Key applications include:
• 10BASE-T (Ethernet)
• 10BASE-T (Ethernet)
• 100BASE-T (Fast Ethernet)
• 1000BASE-T (Gigabit Ethernet)
• Industrial Ethernet
• Ethernet/IP
• Downlinks from control panel to the
machine area
• Uplinks featuring gigabit data transmission
from the control panel to the consolidation point