Molex SST-DN4-PCU-2 Network Interface Card 仕様ガイド
Ideal for real-time control and data-acquisition applications, Molex’s fourth-
generation SST
generation SST
™
DN4 high-performance DeviceNet
*
network interface cards
(NICs) use an enhanced FPGA design to extend NIC reliability and performance
The DN4 family of DeviceNet* network interface cards (NICs) was developed to provide
industrial OEMs and end-users with a more reliable and cost-effective solution for industrial
communication. Ideal for use in real-time control and data-acquisition applications, Molex’s
NICs are the result of 15 years of DeviceNet product expertise.
industrial OEMs and end-users with a more reliable and cost-effective solution for industrial
communication. Ideal for use in real-time control and data-acquisition applications, Molex’s
NICs are the result of 15 years of DeviceNet product expertise.
They use an enhanced FPGA (Field Programmable Gate Array) design with a lower
component count, resulting in an extended product lifecycle and higher reliability. DN4 cards
are available in a variety of product formats. Standard PCI (3.3/5 V) and PC/104 bus’ are
supported. Both single- and dual-channel cards are offered for system flexibility. For more
information on SST DN4 DeviceNet Interface Cards, visit: www.molex.com/link/dn4.html.
component count, resulting in an extended product lifecycle and higher reliability. DN4 cards
are available in a variety of product formats. Standard PCI (3.3/5 V) and PC/104 bus’ are
supported. Both single- and dual-channel cards are offered for system flexibility. For more
information on SST DN4 DeviceNet Interface Cards, visit: www.molex.com/link/dn4.html.
SST
™
DN4 DeviceNet
*
Network Interface Cards
112005 PC/104 Card
112113 PCU (PCI) Card
112113 PCU (PCI) Card
FEATURES AND BENEFITS
• Scans DeviceNet* in 3 to 5 milliseconds for a
high-performance card with real-time control
• Provides simultaneous execution of Group
2 Client (Master) and Server (Slave)
operations that can implement control
schemes where all capabilities may be
required (ie robotic control cells)
operations that can implement control
schemes where all capabilities may be
required (ie robotic control cells)
• Supports poll, strobe, change-of-state (COS)
and cyclic input/output messaging providing
flexibility for any DeviceNet control scheme
flexibility for any DeviceNet control scheme
• QuickConnect capability in Client (Master)
mode ensures devices may be accessed faster
on power-up (in less than 500 milliseconds)
on power-up (in less than 500 milliseconds)
• Used in Controller Area Network (CAN)
networks (2A and 2B, up to 1Mb per
second), and DeviceNet networks (at 125,
250 or 500 kB per second); multiple
network support ensures reduced inventory
for OEMs and Distributors
second), and DeviceNet networks (at 125,
250 or 500 kB per second); multiple
network support ensures reduced inventory
for OEMs and Distributors
• DN4 cards support multiple PC card bus’
(PCI, PC/104) and channels (1, 2 channel)
allows for application flexibility
allows for application flexibility
• Common Industrial Protocol (CIP*)
Safety Server (Slave) implementation is
supported with less effort (time) for an
OEM to implement the Molex CIP Safety
Stack
supported with less effort (time) for an
OEM to implement the Molex CIP Safety
Stack
• Multi-Slave (Server) versions of the PCI
bus card are available (1 channel only);
supports control system simulation to
reduce design and field commissioning time
supports control system simulation to
reduce design and field commissioning time
• DN4 card design is a form-fit-function
replacement for existing DN3 cards
providing backwards compatibility with
DN3 cards for legacy system connections
providing backwards compatibility with
DN3 cards for legacy system connections
• Conformance tested to ODVA standards
(Volume 3, v.1.8) to meet industry
standard requirements
standard requirements
DN4 DeviceNet PC/104 Card
Series 112005
DN4 DeviceNet PCU Card
Series 1112113
*DeviceNet and CIP are trademarks of ODVA
TYPICAL APPLICATIONS
• PC control systems
• HMI/SCADA (Human Machine
• HMI/SCADA (Human Machine
Interface / Supervisory Control and
Data Acquisition) systems
Data Acquisition) systems
• Robot and other machine control
• Diagnostics
• Diagnostics
OPERATING SYSTEMS AND
DRIVERS SUPPORTED
DRIVERS SUPPORTED
• Windows XP / Vista / 7 drivers (32 bit)
• The Console; a grouping of software tools
• The Console; a grouping of software tools
including OPC server configuration and
diagnostic tools
diagnostic tools
• Open, documented memory map interface
with example C source code and Windows
32-bit DLLs for custom driver
development
32-bit DLLs for custom driver
development
DEVICENET SOFTWARE TOOLS
Software available for the SST DeviceNet Inter-
face Cards enables fast integration of industrial
communication into the customer’s application.
face Cards enables fast integration of industrial
communication into the customer’s application.