Hirschmann Spider 8TX Rail Switch 仕様ガイド
SPIDER 8TX
Industrial Networking:Industrial Ethernet:Rail Family:Unmanaged Rail-Switches
Hirschmann Automation and Control GmbH
Product description
Description
Entry Level Industrial ETHERNET Rail Switch,
store and forward switching mode,
Ethernet (10 Mbit/s) and Fast-Ethernet (100 Mbit/s)
store and forward switching mode,
Ethernet (10 Mbit/s) and Fast-Ethernet (100 Mbit/s)
Port type and quantity
8 x 10/100BASE-TX, TP cable, RJ45 sockets, auto-crossing, auto-negotiation,
auto-polarity
auto-polarity
Type
SPIDER 8TX
Order No.
943 376-001
More Interfaces
Power supply/signaling contact
1 plug-in terminal block, 3-pin / no signal contact
Network size - length of cable
Twisted pair (TP)
0 - 100 m
Network size - cascadibility
Line - / star topology
Any
Power requirements
Operating voltage
9,6 V DC - 32 V DC
Current consumption at 24 V DC
Max. 160 mA
Power consumption
Max. 3,9 W 13,3 Btu (IT)/h at 24 V DC
Service
Diagnostics
LEDs (power, link status, data, data rate)
Ambient conditions
Operating temperature
0 ºC to +60 ºC
Storage/transport temperature
-40 ºC to +70 ºC
Relative humidity (non-condensing)
10% to 95%
MTBF
105.7 years; MIL-HDBK 217F: Gb 25 ºC
Mechanical construction
Dimensions (W x H x D)
40 mm x 114 mm x 79 mm
Mounting
DIN Rail 35 mm
Weight
177 g
Protection class
IP 30
Mechanical stability
IEC 60068-2-27 shock
15 g, 11 ms duration, 18 shocks
IEC 60068-2-6 vibration
3.5 mm, 3 Hz - 9 Hz, 10 cycles, 1 octave/min.;
1g, 9 Hz - 150 Hz, 10 cycles, 1 octave/min.
1g, 9 Hz - 150 Hz, 10 cycles, 1 octave/min.
EMC interference immunity
EN 61000-4-2 electrostatic discharge (ESD) 6 kV contact discharge, 8 kV air discharge
EN 61000-4-3 electromagnetic field
EN 61000-4-3 electromagnetic field
10 V/m (80 - 1000 MHz)
EN 61000-4-4 fast transients (burst)
2 kV power line, 4 kV data line
EN 61000-4-5 surge voltage
Power line: 2 kV (line/earth), 1 kV (line/line), 1 kV data line
EN 61000-4-6 conducted immunity
10 V (150 kHz - 80 kHz)
EMC emitted immunity
FCC CFR47 Part 15
FCC CFR47 Part 15 Class A
EN 55022
EN 55022 Class A
Approvals
Safety of industrial control equipment
cUL 508 (E175531)
Scope of delivery and accessories
Scope of delivery
Device, terminal block, operating manual
page 1 of 2