Belden Industrial CAT 6 Patch Cable - Unshielded 仕様ガイド
2
Belden IP67 and IP20 Products
Belden’s sealed IP67-rated Cord Sets, Plug Kits,
Stainless Steel Faceplates and Surface Mount
Boxes are designed for use in factory and
process areas in unprotected and outdoor envi-
ronments. They are resistant to the ingress of
dust, moisture, water and oil and they are
impervious to chemical exposure.
Stainless Steel Faceplates and Surface Mount
Boxes are designed for use in factory and
process areas in unprotected and outdoor envi-
ronments. They are resistant to the ingress of
dust, moisture, water and oil and they are
impervious to chemical exposure.
Belden’s non-sealed, IP20-rated Cord Sets are
designed for use inside protected enclosures,
control rooms, etc., but may be subjected to
harsh conditions such as extreme temperatures,
EMI/RFI and vibration. (For an explanation of
what the IP Codes signify, see IP Enclosure
Ratings Table below.)
designed for use inside protected enclosures,
control rooms, etc., but may be subjected to
harsh conditions such as extreme temperatures,
EMI/RFI and vibration. (For an explanation of
what the IP Codes signify, see IP Enclosure
Ratings Table below.)
Level
Protected Against
Details
0
Not protected
—
1
Dripping water
Dripping water (vertically falling drops) shall have
no harmful effect.
no harmful effect.
2
Dripping water
when tilted up
to 15°
Vertically dripping water shall have no harmful effect
when the enclosure is tilted at an angle up to 15°
from its normal position.
when the enclosure is tilted at an angle up to 15°
from its normal position.
3
Spraying water
Water falling as a spray at any angle up to 60° from
the vertical shall have no harmful effect.
the vertical shall have no harmful effect.
4
Splashing water
Water splashing against the enclosure from any
direction shall have no harmful effect.
direction shall have no harmful effect.
5
Water jets
Water projected by a nozzle against enclosure from
any direction shall have no harmful effects.
any direction shall have no harmful effects.
6
Powerful
water jets
Water projected in powerful jets against the enclosure
from any direction shall have no harmful effects.
from any direction shall have no harmful effects.
7
Immersion
up to 1m
Ingress of water in harmful quantity shall not be
possible when the enclosure is immersed in water
under defined conditions of pressure and time
(up to 1m of submersion).
possible when the enclosure is immersed in water
under defined conditions of pressure and time
(up to 1m of submersion).
8
Immersion
beyond 1m
The equipment is suitable for continuous immersion
in water under conditions which shall be specified
by the manufacturer.
Note: Normally, this will mean that the equipment
is hermetically sealed. However, with certain types of
equipment, it can mean that water can enter but only
in such a manner that produces no harmful effects.
in water under conditions which shall be specified
by the manufacturer.
Note: Normally, this will mean that the equipment
is hermetically sealed. However, with certain types of
equipment, it can mean that water can enter but only
in such a manner that produces no harmful effects.
Level
Object Size
Protected Against
Details
0
—
No protection against contact and ingress of objects.
1
>50 mm
Any large surface of the body, such as the back of a
hand, but no protection against deliberate contact
with a body part.
hand, but no protection against deliberate contact
with a body part.
2
>12.5 mm
Fingers or similar objects.
3
>2.5 mm
Tools, thick wires, etc.
4
>1 mm
Most wires, screws, etc.
5
Dust protected
Ingress of dust is not entirely prevented, but it must
not enter in sufficient quantity to interfere with the
satisfactory operation of the equipment; complete
protection against contact.
not enter in sufficient quantity to interfere with the
satisfactory operation of the equipment; complete
protection against contact.
6
Dust tight
No ingress of dust; complete protection against contact.
The IP Code defined in International Standard IEC 60529
classifies a component’s level of protection against the intrusion
of solid objects or dust, accidental contact, and water. The rating
consists of the letters IP (sometimes interpreted as "ingress protect
rating" or "international protection rating"), followed by two
numbers and an optional letter. The numbers indicate conformity
with the conditions summarized in the tables below. Where there
is no protection rating with regard to one of the criteria, the
number is replaced with the letter X.
classifies a component’s level of protection against the intrusion
of solid objects or dust, accidental contact, and water. The rating
consists of the letters IP (sometimes interpreted as "ingress protect
rating" or "international protection rating"), followed by two
numbers and an optional letter. The numbers indicate conformity
with the conditions summarized in the tables below. Where there
is no protection rating with regard to one of the criteria, the
number is replaced with the letter X.
First Number
The first number indicates the level of protection that the enclosure
provides against access to hazardous parts (i.e., electrical conduc-
tors, moving parts) and the ingress of solid foreign objects.
provides against access to hazardous parts (i.e., electrical conduc-
tors, moving parts) and the ingress of solid foreign objects.
Second Number
Protection of the equipment inside the enclosure against harmful
ingress of water.
ingress of water.
IP Enclosure Ratings