Cisco CATALYST 6509E 9 SLOT 15U CHASSIS NO POWER SUPPLY NO FAN TRAY 仕様ガイド

ページ / 336
1-35
Catalyst 6500 Series Switches Installation Guide
OL-5781-04
Chapter 1      Product Overview
  Catalyst 6509-E Switch
Fan Tray
Supports one hot-swappable fan tray. These fan tray models are 
supported:
WS-C6509-E-FAN—846 CFM
Note
You must install a 2500 W or higher capacity power supply in 
the chassis to power the high-speed fan tray. The 2500 W power 
supply can be powered from either 120 VAC or 220 VAC.
Note
The fan tray contains nine individual fans. The individual fans 
are not field replaceable. You must replace the fan tray.
Fan tray STATUS LED
Red—One or more individual fans have failed.
Green—Fan tray is operating normally.
Power Supply
Supports one or two power supplies. The following models are 
supported:
WS-CAC-2500W (2500 W AC-input power supply).
WS-CDC-2500W (2500 W DC-input power supply).
WS-CAC-3000W (3000 W AC-input power supply).
WS-CAC-4000W-US (4000 W AC-input power supply).
WS-CAC-4000W-INT (4000 W AC-input power supply).
PWR-4000-DC (4000 W DC-input power supply).
WS-CAC-6000W (6000 W AC-input power supply).
Installed power supplies can be of different wattage ratings. Installed 
power supplies can also be both AC-input, both DC-input, or one 
AC-input and one DC-input. Power supplies can be configured in either 
redundant or non-redundant mode.
All Catalyst 6500 series AC-input power supplies require single-phase 
source AC. Source AC can be out of phase between multiple power 
supplies or multiple AC-power plugs on the same power supply because 
all AC power supply inputs are isolated.
Table 1-13
Catalyst 6509-E Switch Features (continued)
Feature
Description