Cisco CATALYST 4500 7 SLOT CHASSIS FAN NO POWER SUPPLY REDUNDANT SUPCAPABLE 仕様ガイド
C H A P T E R
3-1
Catalyst 4500 Series Switches Installation Guide
78-14409-08
3
Installing the Switch in a Rack
Warning
This unit is intended for installation in restricted access areas. A restricted
access area can be accessed only through the use of a special tool, lock and
key, or other means of security. Statement 1017
access area can be accessed only through the use of a special tool, lock and
key, or other means of security. Statement 1017
Warning
Only trained and qualified personnel should be allowed to install, replace, or
service this equipment. Statement 1030
service this equipment. Statement 1030
Warning
To prevent personal injury or damage to the chassis, never attempt to lift or tilt
the chassis using the handles on modules (such as power supplies, fans, or
cards); these types of handles are not designed to support the weight of the unit.
Statement 1032
the chassis using the handles on modules (such as power supplies, fans, or
cards); these types of handles are not designed to support the weight of the unit.
Statement 1032
This chapter describes how to install Catalyst 4500 series switches in a rack. For
first-time installations, perform the procedures in the following sections in the
order listed:
first-time installations, perform the procedures in the following sections in the
order listed:
•
•
Note
Before starting the installation procedures in this chapter, complete the
site-planning checklist in
site-planning checklist in