Canon EOS 5D Mark IV L-series Zoom Lens Kit オーナーマニュアル

503

7

 Custom ControlsN

While the metering timer is active, when you press the depth-of-field 
preview button or the lens’s AF stop button, the focusing point can be 
switched to the registered AF point.

*4: On the setting screen, when you press the <B> button, you can select [Switch 

only when btn is held] or [Switch each time btn is pressed]. To register the AF 
point, see page 500.

While the metering timer is active, pressing the <p> (AF area 
selection) button will switch between the current AF point and the center 
AF point or registered AF point.

*5: On the setting screen, when you press the <B> button, you can select [Switch 

to center AF point] or [Switch to registered AF point]. To register the AF point, 
see page 500.

While the metering timer is active, you can select an AF point directly 
with the <5> or <9> dial without pressing the <S> button.

*6: With the Quick Control Dial setting screen 

displayed, you can press the <B> button, then 
set the direction for switching the AF point for 
when the <5> dial is turned. The [Direction: AF 
point switching] settings for [Horizontal] and 
[Vertical] will work for Single-point Spot AF, 
Single-point AF, Man. select.c: AF point 
expansion, and Expand AF area: Surround. The 
[Direction: Zone AF frame switch] settings for 
[Cycle through the zones], [Horizontal], and [Vertical] will work with Zone AF.

*7: On the Multi-controller setting screen, you can press the <B> button and select 

the AF point ([Switch to center AF point] or [Switch to registered AF point]) the 
camera switches to when you press the center of <9>. To register the AF point, see 
page 500.

: Selected AF point z Center/Registered AF point

If you assign [Direct AF point selection] to <5> and you want to change 
the aperture in the <a> mode, hold down the <A> button and turn the 
<6> dial.