Celerity Technologies Detachable Fiber Optic HDMI Cable オーナーマニュアル
Step 1:
Pre-wiring the fiber optics
Celerity Fiber Optic cables are directional and must be installed correctly. Ensure that the fiber optic plug marked T is
located at the source location. Ensure that the fiber optic plug marked R is located at the display.
located at the source location. Ensure that the fiber optic plug marked R is located at the display.
Step 2:
Attaching the Detachable Fiber Optic connector
Attach the Detachable Fiber Optic connector marked T to the fiber optic plug marked T. Connect to the source component.
Attach the Detachable Fiber Optic connector marked R to the fiber optic plug marked R. Connect to the display component.
Attach the Detachable Fiber Optic connector marked R to the fiber optic plug marked R. Connect to the display component.
USB Power at the Display location (HDMI & DVI only)
The DFO connector marked R also includes a USB cable to provide power for the R connector. Connect the USB cable
to an available USB port on the display. If there is no convenient USB port available then alternatively a USB-AC adapter
(5V/1000mA, not supplied) may be used instead.
to an available USB port on the display. If there is no convenient USB port available then alternatively a USB-AC adapter
(5V/1000mA, not supplied) may be used instead.
LED Display Indicators (HDMI & DVI only)
Ensure that the blue LEDs on the end of the DFO connectors are illuminated when the source and display are powered on.
All Celerity Fiber Optic Cables are plenum rated.
Support
For further assistance, contact
support
@celeritytek.com
or call
949.453.9988
from 9:00a until 5:30p Pacific Time.
User Guide
05/2015
steps
Celerity Detachable Fiber Optic Connectors
Connection diagram on reverse