Sensaphone Sentinel SCD-1200 オーナーマニュアル

18

Sentinel Installation and Setup Guide

The device details page displays the sensor values for your Sentinel. This page is automatically 
updated with the most current information available. At the top of the page are buttons to access the 
Configuration, Alarm Delivery and Logs.  

At the top of the page, you will see the device name, description, address and alarm status. 

You will also see all of the zones for your device in the table. 

Zone – The name of the zone

Value – The current value of the zone

Status – The current status of the zone

If the device has any unacknowledged alarms, a symbol will be displayed in this column

Type – The type of sensor that the zone is set to monitor

The Action dropdown menu provides options that allow you to interact with your device. 

Acknowledge Alarms – Allows you to acknowledge alarms for the selected zones (you can have multiple 
zones selected)

At the top of the dashboard, click Configure Device to go to the device and zone programming screens. 

The box on the left will display all of your configureable zones, as well as Device (for general device 
settings), Power, Battery and Relay Output. As you select an option, the form on the right will change 
to display the appropriate data. Complete the address so that the Sentinel icon will be displayed at the 
appropriate location on the dashboard map.

This page also contains settings for the Device Offline alarm and for Standby Mode. The Device Offline 
alarm will notify you if your devices stops communicating with the sensaphone.net servers for the pro-
grammed time duration. 

Once you have completed your programming, click on the Save Settings button at the bottom of the 
page.