Kenwood DDX375BT オーナーマニュアル
Bluetooth®
Bluetooth®
Pairing a Bluetooth device using a PIN code (for
Bluetooth 2.0)
Bluetooth 2.0)
1
Display the <PIN Code Set> screen.
On the Home screen, touch as follows:
Then, on the <Setup> screen, touch as follows:
[System]
[System]
A <Bluetooth Setup> : [Enter]
On the <Bluetooth Setup> screen, touch as
follows:
<PIN Code> : [0000]
follows:
<PIN Code> : [0000]
2
Change the PIN code.
If you wish to skip changing the PIN code, go to
step 3.
step 3.
0000
1
2
3
4
5
6
7
8
0
Enter
Clear
9
PIN Code Set
• To delete the last entry, touch [Clear].
• To delete the PIN code, touch and hold [Clear].
• To delete the PIN code, touch and hold [Clear].
3
Search for the unit (“DDX3eX”/“DDX3”/
“DDX4”) from your Bluetooth device.
“DDX4”) from your Bluetooth device.
4
Select the unit (“DDX3eX”/“DDX3”/
“DDX4”) on your Bluetooth device.
“DDX4”) on your Bluetooth device.
• If a PIN code is required, enter “0000” (initial) or
new PIN code you have entered in step 2.
• When pairing is completed, the device is
registered on the <Paired Device List> screen.
Note
• The PIN code is initially set to “0000”.
• The maximum number of digits in the PIN code is 15.
• The PIN code is initially set to “0000”.
• The maximum number of digits in the PIN code is 15.
Connecting/disconnecting a registered
Bluetooth device
1
Display the <Paired Device List> screen.
On the Home screen, touch as follows:
Then, on the <Setup> screen, touch as follows:
[System]
[System]
A <Bluetooth Setup> : [Enter]
On the <Bluetooth Setup> screen, touch as
follows:
<Paired Device List>
follows:
<Paired Device List>
: [Enter]
2
Select the device (
1
) you want to connect,
then select [Connection] (
2
).
Device Name 1
Device Name 5
Device Name 4
Device Name 3
Device Name 2
Remove
Connection
OK
Paired Device List
3
Select the device (
1
) to connect, then
return to the <Paired Device List> (
2
).
Device Name
Connect Ready
Connected
ON
OFF
ON
OFF
BT Connection Settings
Select [ON] (to connect) or [OFF] (to disconnect).
: Mobile phone
: Audio device
4
Connect the selected device.
Device Name 1
Device Name 5
Device Name 4
Device Name 3
Device Name 2
Remove
Connection
OK
Paired Device List
• The status is shown as follows:
– <Connecting>: Connection is in progress.
– <Connected>: A connection has been established.
– <Connect Ready>: A connection can be
established.
– <Disconnecting>: Disconnection is in progress.
– <Disconnected>: No connection is established.
• When a Bluetooth mobile phone is connected, the
signal strength and battery level are displayed when
the information is acquired from the device.
the information is acquired from the device.
35
ENGLISH
EN_DDX2018ST_KR.indb 35
2017/05/17 9:28