Kenwood DDX375BT オーナーマニュアル
Clock settings
1
Display the Home screen.
2
Display the <Clock> screen.
On the Home screen, touch as follows:
Then, on the <Setup> screen, touch as follows:
[System]
[System]
A <Clock> : [Enter]
• You can also display the <Clock> screen by
touching the clock area on the Home screen.
3
Set the clock time.
Clock
Synchronize
AM10
28
:
Reset
Radio Data System
E.g. Clock settings screen for DDX395
<Synchronize>
• Radio Data System: Synchronizes the clock time
• Radio Data System: Synchronizes the clock time
with FM RBDS.
• OFF: Sets the clock manually. Touch [
J
]/[
K
] to
adjust the hour, then minute.
– Touching [Reset] will set the minute to “00”.
Getting Started
Getting Started
4
Repeat step 3 to confirm your security
code.
code.
Now, your security code is registered.
To clear the registered security code: touch [CLR]
for <Security Code> in step 2.
Then, enter the current security code to clear and
touch [Enter].
for <Security Code> in step 2.
Then, enter the current security code to clear and
touch [Enter].
• When the unit has been reset or disconnected from
the battery, you are required to enter the security
code. Enter the correct security code, then touch
[Enter].
code. Enter the correct security code, then touch
[Enter].
Activating the security function
You can activate the security function to protect your
receiver system against theft.
receiver system against theft.
1
Display the <Setup> setting screen.
On the Home screen, touch as follows:
2
Activate the security function.
On the <Setup> setting screen, touch as follows:
[System]
[System]
A <SI>: [ON]
The security function is activated.
The security indicator on the monitor panel flashes
when the vehicle ignition is off.
The security indicator on the monitor panel flashes
when the vehicle ignition is off.
To deactivate the security function: Touch [OFF] in
step 2.
step 2.
Setting the security function
Registering a security code
(Only for DDX418BT)
1
Display the Home screen.
2
Display the <Security Code Set> screen.
On the Home screen, touch as follows:
Then, on the <Setup> screen, touch as follows:
[System]
[System]
A <Security Code> : [Set]
3
Enter a four-digit number (
1
), then
confirm the entry (
2
).
• To delete the last entry, touch [Clear].
• To cancel the setting, touch [Cancel].
• To cancel the setting, touch [Cancel].
6
ENGLISH
EN_DDX2018ST_KR.indb 6
2017/05/17 9:27