Kenwood KMM-108U オーナーマニュアル
4
GETTING STARTED
Set the initial settings
1
Press
B SRC to enter STANDBY.
2
Press the volume knob to enter [FUNCTION].
3
Turn the volume knob to make a selection (see the following table), then
press the knob.
press the knob.
4
Press and hold
to exit.
To return to the previous setting item or hierarchy, press
.
Default: XX
AUDIO CONTROL
SWITCH
PREOUT
PREOUT
REAR/ SUB-W: Selects whether rear speakers or a subwoofer are connected to
the line out terminals on the rear (through an external amplifier).
the line out terminals on the rear (through an external amplifier).
SP SELECT
OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or
4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance.
4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance.
TUNER SETTING
PRESET TYPE
NORMAL: Memorizes one station for each preset button in each band
(FM1/ FM2/ FM3/ AM). ; MIX: Memorizes one station for each preset button,
regardless of the selected band.
(FM1/ FM2/ FM3/ AM). ; MIX: Memorizes one station for each preset button,
regardless of the selected band.
SYSTEM
KEY BEEP
ON: Activates the keypress tone. ; OFF: Deactivates.
SOURCE SELECT
PANDORA SRC
ON: Enables PANDORA in source selection. ; OFF: Disables. ( 8)
IHEART SRC
ON: Enables IHEARTRADIO in source selection. ; OFF: Disables. ( 9)
BUILT-IN AUX
ON: Enables AUX in source selection. ; OFF: Disables. ( 8)
F/W UPDATE
UPDATE SYSTEM
F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
3
Cancel the demonstration
When you turn on the power (or after you reset the unit), the display
shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”
shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”
1
Press the volume knob.
[YES] is selected for the initial setup.
2
Press the volume knob again.
“DEMO OFF”
appears.
Set the clock
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [CLOCK], then press the knob.
3
Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4
Turn the volume knob to make the settings, then press the
knob.
knob.
Day Hour Minute
5
Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6
Turn the volume knob to select [12H] or [24H], then press the knob.
7
Press and hold
to exit.
To return to the previous setting item or hierarchy, press
.
While in clock display screen...
Press and hold DISP SCRL to enter clock adjustment mode
directly.
directly.
Then,
perform
step
4
above to set the clock.
1
2
EN_KMM_108U_KN_f.indd 4
9/10/2013 11:12:13 AM