JVC KD-R888BT オーナーマニュアル
ENGLISH
22
AUDIO SETTINGS
PRO EQ
Adjust your own sound settings.
• The settings are stored to [USER].
• The settings made may affect the current settings of [EASY EQ].
• The settings are stored to [USER].
• The settings made may affect the current settings of [EASY EQ].
62.5HZ
LEVEL –09 to LEVEL +09 (LEVEL 00): Adjusts the level to memorize for each source.
(Before making an adjustment, select the source you want to adjust.)
(Before making an adjustment, select the source you want to adjust.)
ON: Turns on the extended bass. ; OFF: Cancels.
100HZ/160HZ/250HZ/400HZ/630HZ/1KHZ/1.6KHZ/2.5KHZ/4KHZ/6.3KHZ/10KHZ/
16kHZ
16kHZ
LEVEL –09 to LEVEL +09 (LEVEL 00): Adjusts the level to memorize for each source.
(Before making an adjustment, select the source you want to adjust.)
(Before making an adjustment, select the source you want to adjust.)
Q FACTOR
1.35/1.50/2.00: Adjust the quality factor.
AUDIO CONTROL
BASS BOOST
LEVEL +01 to LEVEL +05: Selects your preferred bass boost level. ;
OFF: Cancels.
OFF: Cancels.
LOUDNESS
LEVEL 01/LEVEL 02: Boosts low or high frequencies to produce a well-
balanced sound at low volume. ; OFF: Cancels.
balanced sound at low volume. ; OFF: Cancels.
SUB.W LEVEL*
1
SPK-OUT*
2
(Not applicable when 3-way crossover is selected.)
SUB.W 00 to SUB.W +06 (SUB.W +03): Adjusts the
output level of the subwoofer connected via speaker lead.
( 35)
SUB.W 00 to SUB.W +06 (SUB.W +03): Adjusts the
output level of the subwoofer connected via speaker lead.
( 35)
PRE-OUT*
3
SUB.W –50 to SUB.W +10 (SUB.W 00): Adjusts the
output level of the subwoofer connected to the lineout
terminals (SW or REAR/SW) through an external amplifier.
( 35)
output level of the subwoofer connected to the lineout
terminals (SW or REAR/SW) through an external amplifier.
( 35)
SUBWOOFER
SET*
SET*
3
ON: Turns on the subwoofer output. ; OFF: Cancels.
*
1,
*
2,
*
3:
( 23)
1
Press and hold
.
2
Press
to select an item (see the following table), then
press
.
3
Repeat step
2
until the desired item is selected/activated or follow
the instructions stated on the selected item.
4
Press
to exit.
To return to the previous setting item, press
.
Default: XX
EQ SETTING
PRESET EQ
Select a preset equalizer suitable to the music genre.
• Select [USER] to use the settings made in [EASY EQ] or [PRO EQ].
FLAT/DRVN 3/DRVN 2/DRVN 1/HARD ROCK/HIP HOP/JAZZ/POP/
R&B/USER/CLASSICAL
Drive equalizer (DRVN 3/DRVN 2/DRVN 1) boosts specific frequencies in
the audio signal to reduce the noise heard from outside the car or running
noise of the tyres.
• Select [USER] to use the settings made in [EASY EQ] or [PRO EQ].
FLAT/DRVN 3/DRVN 2/DRVN 1/HARD ROCK/HIP HOP/JAZZ/POP/
R&B/USER/CLASSICAL
Drive equalizer (DRVN 3/DRVN 2/DRVN 1) boosts specific frequencies in
the audio signal to reduce the noise heard from outside the car or running
noise of the tyres.
EASY EQ
Adjust your own sound settings.
• The settings are stored to [USER].
• The settings made may affect the current settings of [PRO EQ].
SUB.W SP*
• The settings are stored to [USER].
• The settings made may affect the current settings of [PRO EQ].
SUB.W SP*
1
*
2
:
00 to +06 (Default:
03
SUB.W*
1
*
3
:
–50 to +10
00
BASS:
LVL–09 to LVL+09
LVL 00
MID:
LVL–09 to LVL+09
LVL 00
TRE:
LVL–09 to LVL+09
LVL 00)
JS_JVC_KD_R988BTS_K_EN_5.indd 22
9/1/2016 11:05:39 AM