Axxera AC536Bi オーナーマニュアル
6
AC536Bi
General Operation
Press
or any other button to turn the unit on. Press
again to turn the unit off.
Press SOURCE to select between Radio, Disc, Auxiliary
Input, Bluetooth, USB, iPod or Pandora modes.
Input, Bluetooth, USB, iPod or Pandora modes.
The radio frequency (tuner mode) or MP3 title/track
information (USB mode) will be shown by default. Press
DISP to toggle back and forth between the default display
and clock display.
information (USB mode) will be shown by default. Press
DISP to toggle back and forth between the default display
and clock display.
Press RESET upon initial installation or if abnormal
operation occurs. Reset button is located behind the face
plate.
operation occurs. Reset button is located behind the face
plate.
Press OPEN to open the face plate, then pull away to
remove. To re-install, insert the right side of faceplate first
then push the left side in to secure.
remove. To re-install, insert the right side of faceplate first
then push the left side in to secure.
Insert a 3.5mm connector in the front panel AUX port.
Connect the other end of the 3.5mm connector to the
headphone output of an audio device, MP3 player, etc.
Connect the other end of the 3.5mm connector to the
headphone output of an audio device, MP3 player, etc.
Adjust volume using the volume knob (00-46).
While the unit is powered on, press MUTE to silence the
audio. Press MUTE again or rotate the volume knob to
restore audio volume.
audio. Press MUTE again or rotate the volume knob to
restore audio volume.
Power On/Off
Source
Display
Reset
Faceplate Removal
Auxiliary Input
Volume
Mute