Kenwood DPX702BH オーナーマニュアル
22
AUDIO SETTINGS
SPEAKER SIZE
FRONT
SIZE
3.5"/ 4"/ 4.75"/ 5"/ 6.5"/ 6.75"/ 7"/ 4×6/ 5×7/
6×8/ 6×9/ 7×10: Selects according to the connected
speaker size for optimum performance.
6×8/ 6×9/ 7×10: Selects according to the connected
speaker size for optimum performance.
TWEETER
SMALL/ MIDDLE/ LARGE: Selects according to the
size range of the connected tweeter for optimum
performance. ; NONE: Not connected.
size range of the connected tweeter for optimum
performance. ; NONE: Not connected.
REAR
3.5"/ 4"/ 4.75"/ 5"/ 6.5"/ 6.75"/ 7"/ 4×6/ 5×7/ 6×8/ 6×9/ 7×10:
Selects according to the connected speaker size for optimum performance. ;
NONE: Not connected.
Selects according to the connected speaker size for optimum performance. ;
NONE: Not connected.
SUBWOOFER
6.5"/ 8"/ 10"/ 12"/ 15" OVER: Selects according to the connected speaker
size for optimum performance. ; NONE: Not connected.
size for optimum performance. ; NONE: Not connected.
X ' OVER
TWEETER
FRQ
1KHZ/ 1.6KHZ/ 2.5KHZ/ 4KHZ/ 5KHZ/ 6.3KHZ/
8KHZ/ 10KHZ/ 12.5KHZ: Adjusts the crossover
frequency for the tweeter speaker.
8KHZ/ 10KHZ/ 12.5KHZ: Adjusts the crossover
frequency for the tweeter speaker.
GAIN LEFT
–8 to 0: Adjusts the output volume of the left tweeter.
GAIN RIGHT
–8 to 0: Adjusts the output volume of the right tweeter.
FRONT HPF
F - HPF FRQ
30HZ/ 40HZ/ 50HZ/ 60HZ/ 70HZ/ 80HZ/ 90HZ/
100HZ/ 120HZ/ 150HZ/ 180HZ/ 220HZ/ 250HZ:
Adjusts the crossover frequency for the selected
speakers (high pass filter). ; THROUGH: All signals are
sent to the selected speakers.
100HZ/ 120HZ/ 150HZ/ 180HZ/ 220HZ/ 250HZ:
Adjusts the crossover frequency for the selected
speakers (high pass filter). ; THROUGH: All signals are
sent to the selected speakers.
F - HPF SLOPE
–6DB/ –12DB/ –18DB/ –24DB: Adjusts the
crossover slope. (Selectable only if a setting other than
[THROUGH] is selected for [F - HPF FRQ].)
crossover slope. (Selectable only if a setting other than
[THROUGH] is selected for [F - HPF FRQ].)
F - HPF GAIN
–8 to 0: Adjusts the output volume of the selected
speaker.
speaker.
LOUDNESS
LEVEL1/ LEVEL2: Selects your preferred low and high
frequencies boost to produce a well-balanced sound at a low
volume level. ; OFF: Cancels.
frequencies boost to produce a well-balanced sound at a low
volume level. ; OFF: Cancels.
SUBWOOFER SET
ON: Turns on the subwoofer output. ; OFF: Cancels.
FADER
R15 to F15 (0): Adjusts the rear and front speaker output
balance.
balance.
BALANCE
L15 to R15 (0): Adjusts the left and right speaker output
balance.
balance.
VOLUME OFFSET
–15 to +6 (0): Preset the initial volume level of each source.
(Before adjustment, select the source you want to adjust.)
(Before adjustment, select the source you want to adjust.)
SOUND EFFECT
SOUND RECNSTR
(Sound reconstruction)
(Sound reconstruction)
(Not applicable for TUNER source, AUX source and SIRIUS XM source.)
ON: Creates realistic sound by compensating the high-
frequency components and restoring the rise-time of
the waveform that are lost in audio data compression. ;
OFF: Cancels.
ON: Creates realistic sound by compensating the high-
frequency components and restoring the rise-time of
the waveform that are lost in audio data compression. ;
OFF: Cancels.
SPACE ENHANCE
(Not applicable for TUNER source.)
SMALL/ MEDIUM/ LARGE: Virtually enhances the sound
space. ; OFF: Cancels.
SMALL/ MEDIUM/ LARGE: Virtually enhances the sound
space. ; OFF: Cancels.
SND REALIZER
LEVEL1/ LEVEL2/ LEVEL3: Virtually makes the sound more
realistic. ; OFF: Cancels.
realistic. ; OFF: Cancels.
STAGE EQ
LOW/ MIDDLE/ HIGH: Virtually adjust the sound position
heard from the speakers. ; OFF: Cancels.
heard from the speakers. ; OFF: Cancels.
DRIVE EQ
ON: Boosts the frequency to reduce the noise heard from
outside the car or running noise of the tyres. ; OFF: Cancels.
outside the car or running noise of the tyres. ; OFF: Cancels.
JS_KWD_DPX792BH_KN_EN_00_1.indd 22
28/10/2015 5:24:17 PM