Elac CC 180 31518 プリント
製品コード
31518
CC 180, the hi-fi centre in classic rack format
The CC 181 now follows the CC
180 as yet another centre speaker
in the 180 Series in a classic rack
format. With a width of 435 mm, it
fits into any standard AV set-up
(AV receiver, DVD player etc.).
Special attention have been paid
to the reduction of the height of
the cabinet. This have been
achieved by the use of the newly-
developed 135-mm woofer driver.
The reduction of the cabinet
height was done without any loss
in power and sound quality.
Acoustically, the CC 180 is a
perfect match to the other
members of the 180 Series. It is
characterized by a natural sound
with a substantial bass and very
balanced middle/high range.
180 as yet another centre speaker
in the 180 Series in a classic rack
format. With a width of 435 mm, it
fits into any standard AV set-up
(AV receiver, DVD player etc.).
Special attention have been paid
to the reduction of the height of
the cabinet. This have been
achieved by the use of the newly-
developed 135-mm woofer driver.
The reduction of the cabinet
height was done without any loss
in power and sound quality.
Acoustically, the CC 180 is a
perfect match to the other
members of the 180 Series. It is
characterized by a natural sound
with a substantial bass and very
balanced middle/high range.
Equipment, technical features:
•
New 135 mm aluminum sandwich woofer with same performance as the well known 140 mm woofer used for
example in the FS 187.
example in the FS 187.
•
The crossover uses 2 ½-way technology for the widest possible listening zone.
•
The JET III tweeter with its special neodymium magnet system and an upper cut-off frequency of 50 kHz.
Practical/other features:
•
Centre speaker with height of only 158 mm in classic rack format.
•
Bi-wiring (bi-amping) terminal enabling separate signals for high- and low-/mid-range.
•
Cloth frame / metal grille fixed magnetically
•
Natural sound, matching the standalone and shelf speakers of the 180 Series.
•
Double chamfered bass reflex tube to minimise airflow noises.
•
Internal cabinet bracing to minimize cabinet resonance.
•
The impedance of 6 ohms means that the centre can also be connected to load-critical amplifiers or to
surround-sound amplifiers using class D technology without difficulty.
surround-sound amplifiers using class D technology without difficulty.
Colours:
White matt finish, black matt finish, equipped with cloth frame and metal grille.
Specifications:
Dimensions: Height * Width * Depth
158 x 435 x 338/350
[mm] with/without grille
Weight
approx. 8.5
[kg]
Principle
2 ½
way, bass reflex
Woofer
Bass reflex port
Bass reflex port
2 x 135 mm
1 x 45 mm (rear)
1 x 45 mm (rear)
Ø AS cone, shielded
Tweeter
JET III
Crossover frequencies of the filter
700 /2600
[Hz]
Nominal power handling
80
[W]
Peak power handling
110
[W]
Frequency range (as per IEC 268-5)
44 - 50000
[Hz]
Sensitivity
85.5
[dB/W/m]
Sensitivity
87
[dB/2.83V/m]
Suitable for amplifiers from … to
4 - 8
[Ω]
Nominal impedance
6
[Ω]
Minimum impedance
5.1 / 210
[Ω/Hz]
Recommended Amplifier Power at Nominal Impedance
20 - 170
[W/channel]