DJI Phantom 3 Standard (Factory Refurbished) オーナーマニュアル

©

 2015 DJI. All Rights Reserved. 

Remote Controller

Profile

The Phantom 3 Standard remote controller features a 2.4 GHz WiFi Video Downlink, 5.8 GHz aircraft 

transmission system, and a built-in battery. It is capable of transmitting signals to the aircraft at up 

to 0.62 miles (1 km). There is a foldable mobile device holder attached to the remote controller used 

to mount your smartphone.

 

Compliance: The remote controller is made to comply with both CE and FCC standards.

 

Operating Modes: The controls can be set to Mode 1, Mode 2 or a custom mode. 

 

Mode 1: The right stick serves as the throttle.

 

Mode 2: The left stick serves as the throttle.

The mobile device holder can be tilted at different positions and angles.

DO NOT force an overlarge mobile device into the mobile device holder. 

Controls and Operation

Powering on the Remote Controller

1. Toggle the S1 switch to the upper most position and ensure both control sticks are in the neutral 

position.

2. Slide the power switch to the right to turn on the remote controller.

3. The Status LED will light up solid green when the remote controller is connected to the aircraft. The 

Battery Level Indicator will display the battery level of the remote controller.

S1

Charging the Remote Controller 

Charge the remote controller through the Micro USB port using the provided Micro USB cable. The 

Battery Level Indicator will blink green when it is charging.