DJI Phantom 3 Standard (Factory Refurbished) オーナーマニュアル

Product Profile

Phantom 3 Standard

User Manual

Preparing the Aircraft and Remote Controller

Removing the Gimbal Clamp

Slide the gimbal clamp off the camera.

Attaching the Propellers

Attach the black propeller nuts onto the motors with black dots and spin them counter-clockwise to

secure. Attach the silver propeller nuts onto the motors without black dots and spin them clockwise to

secure.

Preparing the Remote Controller:

1. Unfold the mobile device holder and adjust its position and angle.

2. Slide the power switch to the right to turn on the remote controller. Ensure the battery is fully charged.

3. Be sure the S1 switch is toggled to the upper most position. The Status LED will become solid

green if the remote controller is functioning properly.

Battery Installation

Slide battery into the battery compartment according to the arrow’s direction shown below. Make

sure that you hear a click sound indicates the battery is firmly installed. Failure to do so may affect

the flight safety of your aircraft.

Tighten the propellers with both hands before each flight.