Boyo VTR113 オーナーマニュアル

There are two ways to mount vehicle camera recorder.

1.  You can use windshield suction cup to mount on to the windshield. If 

you preferred to use windshield suction mount, please locate the right 
place for you and use the lever to lock the position on to the windshield.  
When the suction cup has been mounted on the windshield, please 
slide the #17 base-clip on to the suction cup mount and adjust VTR113 
for the desired position. 

2.  If you prefer to permanently mount it using double sided tape, please 

peel off one side of the tape and attach it to the #17 base-clip.  Then peel 
off the other side of the tape and mount it to a safe location area on the 
windshield

There are two ways to power the VTR113.   You can power the DVR using 
the cigarette plug or the OBDII connector if the vehicle is equipped.  

1.  Power using OBDII connector

A.  The OBD II port is typically located inside the vehicle above 

the brake pedal, under the steering wheel.  Please see vehicle 
user’s manual if you cannot locate OBD II port)

A.  Insert OBDII connector on to the OBD II port of the vehicle and 

connect power wire between power adapter and VTR113.

2.  Power using car charger

B.  Insert the cigarette car charger plug into the cigarette lighter 

socket in the vehicle.

C.  Connect the power cable to the car charger and power port to 

VTR113 USB port.

D.  The VTR113 will power up and start recording automatically 

when the car starts.

3