DJI Phantom 4 Advanced Quadcopter オーナーマニュアル

Aircraft

©

 2017 DJI All Rights Reserved. 

Phantom 4 Advanced / Advanced+ User Manual

•  Landing Protection will not be active in the following circumstances:

a) When the user is controlling the pitch/roll/throttle sticks (Landing ground detection will 

re-activate when control sticks are not in use)

b) When the positioning system is not fully functional (e.g. drift position error)

c) When the downward vision system needs re-calibration

d) When light conditions are not sufficient for the downward vision system

•  If an obstacle is within 1-meter of the aircraft, the aircraft will descend to 0.3 m above the 

ground and hover. The aircraft will land upon with user confirmation.  

Intelligent Flight Mode

TapFly 

Introduction
With the TapFly feature, users can now tap on the mobile device screen to fly in the designated direction 
without using the remote controller. The aircraft will automatically avoid obstacles it sees or brake and hover 
provided that the lighting is appropriate (< 300 lux) nor too bright (> 10,000 lux).

Using TapFly
Ensure the aircraft is in P-mode, then follow the steps below to use TapFly:

1. Take off and ensure the aircraft is flying at least 6 feet (2 meters) above the ground.

ON

OFF

Auto Hold

2 meters 

2. Launch the DJI GO 4 app and tap 

 

, then tap 

 

, read and understand the prompts. 

AE

09:29

P-GPS

12

In Flight

 (GPS)