DJI Phantom 4 Advanced Quadcopter オーナーマニュアル

Aircraft

Phantom 4 Advanced / Advanced+ User Manual

Attaching the Propellers

1. Be sure to remove the warning stickers from the motors before attaching the propellers.

2. Mount the propellers with black propeller rings to the motors with black dots. Mount the propellers with

sliver propeller rings to the motors without black dots. Press the propeller down onto the mounting

plate and rotate in the lock direction until it is secured in its position.

Detaching the Propellers

Press the propellers down into the motor mount and rotate in the unlock direction.

Be aware of the sharp edges of the propellers. Handle with care.

Use only the DJI approved propellers. Do not mix propeller types.

Check that the propellers and motors are installed correctly and firmly before every flight.

Ensure that all propellers are in good condition before each flight. DO NOT use aged, chipped,

or broken propellers.

To avoid injury, STAND CLEAR of and DO NOT touch propellers or motors when they are spinning.

ONLY use original DJI propellers for a better and safer flight experience.

Flight Recorder

Flight data is automatically recorded to the internal storage of the aircraft. This includes flight

telemetry, aircraft status information, and other parameters. To access this data, connect the aircraft

to the PC through the Micro USB port and launch the DJI Assistant 2.

Attaching and Detaching the Propellers

Use only DJI approved propellers with your Phantom 4 Advanced / Advanced+. The silver and

black ring on the propeller indicate where they should be attached and in which direction whey

should spin.

Propellers

Silver Ring

Black Ring

Figure

Attach On

Motors without black dots

Motors with black dots

Legends

Lock : Turn the propellers in the indicated direction to mount and tighten.

Unlock : Turn the propellers in the indicated direction to loosen and remove.