DJI Phantom 4 Advanced Quadcopter オーナーマニュアル

Flight

Phantom 4 Advanced / Advanced+ User Manual

4. Re-calibrate the aircraft if the aircraft status indicators glows blinking red.

If the Aircraft Status Indicator blinks red and yellow after the calibration procedure, move your

aircraft to a different location and try again.

DO NOT calibrate the compass near metal objects such as a metal bridge, cars, scaffolding.

If the aircraft status indicators are blinking red and yellow alternately after placing the aircraft on

the ground, the compass has detected magnetic interference. Change your location.

Auto Takeoff and Auto Landing

Auto Takeoff

Use auto takeoff only if the Aircraft Status Indicators are blinking green. Follow the steps below to use the

auto takeoff feature:

1. Launch the DJI GO 4 app, and tap GO FLY.

2. Complete all steps on the pre-flight checklist.
3. Tap“ ”, and confirm that conditions are safe for flight. Slide the icon to confirm and takeoff.

4. Aircraft takes off and hovers at (1.2 meters) above ground.

Aircraft Status Indicator blinks rapidly when it is using the Vision System for stabilization. The

aircraft will automatically hover below 3 meters. It is recommended to wait until there is sufficient

GPS lock before using the Auto Take-off feature.

Auto-Landing

Use auto-landing only if the Aircraft Status Indicator is blinking green. Follow the steps below to use the

auto-landing feature:
1. Tap on , to ensure the landing condition is ideal. Slide to confirm.

2. Abort landing process immediately by using the button on the screen.

3. a. When Landing Protection determines that the ground is suitable for landing, the Phantom 4

Advanced / Advanced+ will land gently.

b. If Landing Protection determines that the ground is not suitable for landing, the Phantom 4

Advanced / Advanced+ will hover and wait for pilot confirmation.

3. Hold the aircraft vertically, with nose pointing downward, and rotate it 360 degrees around the center

axis.