Sony STR-DN1080 オーナーマニュアル
36
GB
To listen to the sounds from a device connected to the AUDIO IN jacks, do not connect any device to the HDMI
IN, COAXIAL IN, and OPTICAL IN jacks, which are labeled with the same device name (such as SAT/CATV, TV,
VIDEO 1, and SA-CD/CD).
IN, COAXIAL IN, and OPTICAL IN jacks, which are labeled with the same device name (such as SAT/CATV, TV,
VIDEO 1, and SA-CD/CD).
You can connect devices other than those indicated above to the AUDIO IN jacks (SAT/CATV, VIDEO 1, and SA-
CD/CD).
CD/CD).
You can rename each input so that the name can be displayed on the display panel of the receiver. For details,
refer to “Changing the name for each input (Name)” in Help Guide.
refer to “Changing the name for each input (Name)” in Help Guide.
Before connecting cables, be sure to disconnect the AC power cord (mains lead).
Only audio signals from [USB], [Bluetooth] (only when [Bluetooth Mode] is set to [Receiver]), [Home Network],
[Music Service List], and [FM TUNER] and audio signals input from AUDIO IN jacks located on the rear panel of
the receiver are output to the Zone 2 speakers.
[Music Service List], and [FM TUNER] and audio signals input from AUDIO IN jacks located on the rear panel of
the receiver are output to the Zone 2 speakers.
External digital input from OPTICAL IN, COAXIAL IN and HDMI IN jacks cannot be output to Zone 2.
If you set [DSD Native] in [Audio Settings] to [On], no audio signals for DSD content from [USB] or [Home
Network] are output to the Zone 2 speakers.
Network] are output to the Zone 2 speakers.
Note
Tip
Connecting another amplifier in Zone 2
Note
Audio cable (not supplied)
Amplifier/
Receiver
Main zone
Zone 2
Speaker
Speaker
Audio signals