ONKYO TX-NR575 オーナーマニュアル

USB Storage Device

You can play music files stored on a USB 
storage device.

Perform the following procedure when the 
unit is on.
1. Switch the input on the TV to that 

assigned to the unit.

2. Plug your USB storage device with the 

music files into the USB port of this unit’s 
rear panel.

3. Press NET (a) on the remote controller 

to display the network service list 
screen.

4. With the cursors on the remote 

controller, select "USB", and then press 
ENTER (b).

0 If the "USB" indicator flashes on the 

display, check whether the USB 
storage device is plugged in properly.

0 Do not unplug the USB storage 

device while "Connecting···" is 
appeared on the display. This may 
cause data corruption or malfunction.

5. Press ENTER on the remote controller 

again in the next screen. The list of 
folders and music files on the USB 
storage device are displayed. Select the 
folder with the cursors and press ENTER 
to confirm your selection.

6. With the cursors on the remote 

controller, select the music file, and then 
press ENTER to start playback.

0 To return to the previous screen, press 

 (c).

0 The USB port of this unit conforms with 

the USB 2.0 standard. The transfer 
speed may be insufficient for some 
content you play, which may cause 
some interruption in sound.

0 Operation cannot be guaranteed for all 

USB storage devices.

0 This unit can use USB storage devices 

that comply with the USB mass storage 
class standard. The unit is also 
compatible with USB storage devices 
using the FAT16 or FAT32 file system 
formats.

Troubleshooting | Supplementary Information, etc.

T

V

b

a

c