MartinLogan Motion® Vision X オーナーマニュアル
16
new soundbar is plugged in, the Wi-Fi Setup
and Status button will start pulsing slowly. If
the soundbar is already configured to connect
to a wi-fi network, the button will turn solid
(connected) or blink rapidly (not connected).
and Status button will start pulsing slowly. If
the soundbar is already configured to connect
to a wi-fi network, the button will turn solid
(connected) or blink rapidly (not connected).
4. Once the Wi-Fi Setup and Status button starts
pulsing slowly, your soundbar is in Access Point
Mode and ready to connect to your wireless
network. Note: If the soundbar’s Wi-Fi Setup
and Status button is not pulsing slowly, press
and hold the button for 8 seconds until you have
heard two tones—one at 3 seconds and another
at 8 seconds. The soundbar will display “ACCS.
PNT.” After 20 seconds, the Wi-Fi Setup and
Status button will begin pulsing slowly to indicate
Access Point mode is ready. At anytime you can
press the button again to cancel the setup mode.
Mode and ready to connect to your wireless
network. Note: If the soundbar’s Wi-Fi Setup
and Status button is not pulsing slowly, press
and hold the button for 8 seconds until you have
heard two tones—one at 3 seconds and another
at 8 seconds. The soundbar will display “ACCS.
PNT.” After 20 seconds, the Wi-Fi Setup and
Status button will begin pulsing slowly to indicate
Access Point mode is ready. At anytime you can
press the button again to cancel the setup mode.
5. Launch the DTS Play-Fi
®
app.
Android Device Users:
a) The app will automatically find your device
a) The app will automatically find your device
and provide prompts for setup.
b) Touch the “Setup” button on the screen.
c) Enter the password for your wireless network;
c) Enter the password for your wireless network;
the app will connect your device to your
network.
network.
d) Once your device is connected, you will
notice that the Wi-Fi Setup and Status button
on your soundbar will change from blinking
to solid. This may take up to a minute. If, after
a minute, the button continues to blink rapidly,
setup failed and you should try again.
on your soundbar will change from blinking
to solid. This may take up to a minute. If, after
a minute, the button continues to blink rapidly,
setup failed and you should try again.
iOS Device Users:
a) The app will prompt you to set up a new
a) The app will prompt you to set up a new
speaker. Click on the screen to view setup
instructions. If the app does not prompt you
to set up a new device, within the app, go
to ‘Settings > Add Play-Fi Device’. Follow
the on-screen instructions.
instructions. If the app does not prompt you
to set up a new device, within the app, go
to ‘Settings > Add Play-Fi Device’. Follow
the on-screen instructions.
b) You will be prompted to exit the DTS Play-Fi
app and open your iOS device’s Settings app.
c) Select Wi-fi in Settings. Ensure that Wi-Fi is
enabled on your device. Select the Wi-Fi
network with “Play-Fi ” in the name.
network with “Play-Fi ” in the name.
d) Once your soundbar is selected as the Wi-Fi
network, exit iOS Settings and open the DTS
Play-Fi app. You should now be prompted to
select your wireless network and enter your
wireless network password.
Play-Fi app. You should now be prompted to
select your wireless network and enter your
wireless network password.
e) Once your device is connected, you will
notice that the Wi-Fi Setup and Status button
on your soundbar will change from blinking
to solid. This may take up to a minute. If, after
a minute, the button continues to blink rapidly,
setup failed and you should try again.
on your soundbar will change from blinking
to solid. This may take up to a minute. If, after
a minute, the button continues to blink rapidly,
setup failed and you should try again.
PC Users:
a) The app will automatically find your device and
a) The app will automatically find your device and
provide prompts for set up. If the app does not
prompt you to set up a new device, within the
app go to the settings screen and click ‘Setup
Play-Fi Device’. Follow the on-screen instructions.
prompt you to set up a new device, within the
app go to the settings screen and click ‘Setup
Play-Fi Device’. Follow the on-screen instructions.
b) Click the “Set-up” button on the screen.
c) Select the speaker(s) you want to set up.
d) Enter the password for your wireless network;
c) Select the speaker(s) you want to set up.
d) Enter the password for your wireless network;
the app will connect your device to your
network. You will notice the Wi-Fi Setup and
Status button will have changed from blinking
to solid. This may take up to a minute. If, after
a minute, the button continues to blink rapidly,
setup failed and you should try again.
network. You will notice the Wi-Fi Setup and
Status button will have changed from blinking
to solid. This may take up to a minute. If, after
a minute, the button continues to blink rapidly,
setup failed and you should try again.
6 Your soundbar is now connected to your wireless
network. Reconnect your mobile device or PC
to your wireless network. You may re-name your
device using the app.
to your wireless network. You may re-name your
device using the app.
CONNECTING TO A WIRELESS NETWORK:
WI-FI PROTECTED SETUP (WPS)
Wi-Fi Protected Setup (WPS) is a feature found on
most wireless routers that allows your soundbar
product to securely and automatically connect
WI-FI PROTECTED SETUP (WPS)
Wi-Fi Protected Setup (WPS) is a feature found on
most wireless routers that allows your soundbar
product to securely and automatically connect