Netgear AC1750 オーナーマニュアル
Specify Initial Settings
23
AC1750 WiFi Cable Modem Router
9.
Click the Apply button.
Your settings are saved.
Note:
If you get address not found errors when you visit a website, it is likely
that your DNS servers are not set up correctly. Contact your Internet
provider to get the DNS server addresses.
that your DNS servers are not set up correctly. Contact your Internet
provider to get the DNS server addresses.
Specify IPv6 Settings
You can select how you want to assign IPv6 address to the devices on the your home
network. You can use either the DHCP Server or Auto Config to assign IPv6 address. Using
DHCP Server might pass more information to LAN devices, but some IPv6 systems might not
support the DHCv6 client function. Auto Config is used by default.
network. You can use either the DHCP Server or Auto Config to assign IPv6 address. Using
DHCP Server might pass more information to LAN devices, but some IPv6 systems might not
support the DHCv6 client function. Auto Config is used by default.
To specify IPv6 settings:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type http://routerlogin.net.
A login window opens.
3.
Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > IPv6.
5.
Select an IP Address Assignment radio button.
6.
Select or clear the Disable IPv6 Firewall Protection check box.