Netgear AC1900 Nighthawk™ オーナーマニュアル

A login screen displays.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and 
password are case-sensitive.

The BASIC Home screen displays.

Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering. 

Select the Port Triggering radio button.

Click the Add Service button.

In the Service Name field, type a descriptive service name. 

In the Service User list, select Any, or select Single address and enter the IP address of 

one computer:

Any (the default) allows any computer on the Internet to use this service. 

Single address restricts the service to a particular computer. 

Select the service type, either TCP or UDP or TCP/UDP (both). 

If you are not sure, select TCP/UDP.

In the Triggering Port field, enter the number of the outbound traffic port that will open the 

inbound ports. 

Enter the inbound connection port information in the Connection Type, Starting Port, and 

Ending Port fields.

Click the Apply button.

The service is now in the Portmap table. You must enable port triggering before the 
router used port triggering for the service that you added. See the following section.



Launch an Internet browser from a computer or wireless device that is connected to the 

network.

Type http://www.routerlogin.net or http://www.routerlogin.com.