Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Netgear
  4. AC1900 Nighthawk™
  5. オーナーマニュアル

Netgear AC1900 Nighthawk™ オーナーマニュアル

ダウンロード
ページ / 129
Specify Internet Port Settings 
97
 Nighthawk AC1900
 WiFi Cable
 Modem
 Router
9. 
Click the Apply button.
Your changes are saved.
Delete a Port Forwarding Entry
To delete a port forwarding entry:
1. 
Launch an Internet browser from a computer or wireless device that is connected to the 
network.
2. 
Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. 
Enter the user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4. 
Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
5. 
Select the Port Forwarding radio button as the service type
6. 
In the table, select the radio button next to the service name.
7. 
Click the Delete Service button.
Application Example: Make a Local Web Server Public
If you host a web server on your local network, you can use port forwarding to allow web 
requests from anyone on the Internet to reach your web server. 
To make a local web server public:
1. 
Assign your web server either a fixed IP address or a dynamic IP address using DHCP 
address reservation. 
In this example, your modem router always gives your web server an IP address of 
192.168.0.33. 
2. 
In the Port Forwarding/Port Triggering screen, configure the modem router to forward the 
HTTP service to the local address of your web server at 192.168.0.33. 
HTTP (port 80) is the standard protocol for web servers.
3. 
(Optional) Register a host name with a Dynamic DNS service, and specify that name in the 
Dynamic DNS screen of the modem router. 
Dynamic DNS makes it much easier to access a server from the Internet because you 
can type the name in the Internet browser. Otherwise, you must know the IP address that 
the ISP assigned, which typically changes.