Netgear AC1900 Nighthawk™ オーナーマニュアル
Share USB Devices Attached to the Router
77
Nighthawk AC1900
Smart WiFi Router
4.
Select ADVANCED > USB Functions > ReadySHARE Storage.
5.
Scroll down to the Available Networks Folder section of the page, and adjust the following
settings:
•
Share Name. If only one device is connected, the default share name is
USB_Storage. (Some router models have more than one USB port.)
USB_Storage. (Some router models have more than one USB port.)
You can click the name, or you can type it in the address field of your web browser. If
Not Shared is shown, the default share has been deleted, and no other share for the
root folder exists. Click the link to change this setting.
Not Shared is shown, the default share has been deleted, and no other share for the
root folder exists. Click the link to change this setting.
•
Read Access and Write Access. Show the permissions and access controls on the
network folder. All–no password (the default) allows all users to access the network
folder. The password for admin is the same one that you use to log in to the router.
network folder. All–no password (the default) allows all users to access the network
folder. The password for admin is the same one that you use to log in to the router.
•
Folder Name. Full path of the network folder.
•
Volume Name. Volume name from the storage device (either USB drive or HDD).
•
Total Space and Free Space. Show the current utilization of the storage device.
Add a Network Folder on a USB Device
You can add network folders on the USB storage device.
To add a network folder:
1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2.
Enter http://www.routerlogin.net.
A login window displays.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.