Netgear Orbi AC3000 Tri-band Wi-Fi® Router オーナーマニュアル

The BASIC Home page displays.

Select ADVANCED > Advanced Setup > VPN Service.

The VPN Service page displays.

Select the Enable VPN Service check box.

By default, the VPN uses the UDP service type and uses port 12974. If you want to 
customize the service type and port, we recommend that you change these settings 
before you install the OpenVPN software.

To change the service type, scroll down and select the TCP radio button.

To change the port, scroll down to the Service Port field, and type the port number that you 

want to use.

Click the Apply button.

Your settings are saved. VPN is enabled in the router, but you must install and set up 
OpenVPN software on your computer before you can use a VPN connection.

You must install this software on each Windows computer, Mac computer, iOS device, or 

Android device that you plan to use for VPN connections to your router.

You must install this software on each Windows computer that you plan to use for VPN 
connections to your router.



Launch a web browser from a WiFi-enabled computer or mobile device that is 

connected to the network.

Enter orbilogin.com.

A login window opens.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and 
password are case-sensitive.

The BASIC Home page displays.

Select ADVANCED > Advanced Setup > VPN Service.

The VPN Service page displays.

Make sure that the Enable VPN Service check box is selected.

Specify any VPN service settings on the page.