Tascam DR-44WL オーナーマニュアル
TASCAM DR-44WL
7
2 – Names and functions of parts
press the / button to move forward to the next mark.
PLAY
FUNCTION
screen is open, use this
button to set the IN (start) and OUT (end) points of the
interval that you want to set for loop playback. When the IN
(start) and OUT (end) points are already set, press this button
to clear the IN and OUT points.
t
QUICK button
When the Home screen,
PLAY
FUNCTION
screen,
BROWSE
screen or
SONG
screen is open, press this
button to pop up the quick menu. (See “QUICK button
y
Wheel
This is used to select items or change value on setting
screens. Also used to change the playback position in a file.
Front panel
u
Wi-Fi indicator
Indicates the status of wireless LAN.
Lights out: OFF
Blinks: Waiting to be connected
Lights up: Operable from the exclusive application
Blinks: Waiting to be connected
Lights up: Operable from the exclusive application
(TASCAM DR CONTROL)
i
EXT MIC/LINE IN 1/L / 2/R jack (XLR/TRS)
These are balanced analog XLR/TRS combo jacks for micro-
phone and line level inputs.
XLR (1: GND, 2: HOT, 3: COLD)
TRS (Tip: HOT, Ring: COLD, Sleeve: GND)
TRS (Tip: HOT, Ring: COLD, Sleeve: GND)
CAUTION
• Confirm that phantom power is OFF before connecting
a line level device to these EXT MIC/LINE IN jacks. If you
connect a line level device while phantom power is being
supplied, that device and this unit could be damaged.
• When connecting to or disconnecting a condenser micro-
phone from the EXT MIC/LINE IN jack, confirm that the
phantom power for that jack is OFF. If you connect or
disconnect a microphone while phantom power is being
supplied, that microphone and this unit could be damaged.
• Do not connect an unbalanced dynamic microphone to
an XLR connector when phantom power is being supplied.
Doing so could damage that microphone and this unit.
Left side panel
o
SD card slot
Insert or remove a SD card.
p
HOLD/
switch
To turn the power on/off, slide and hold the switch towards
the
icon.
When you slide the switch towards the HOLD side, all the
functions of the buttons are locked.
a
/LINE OUT jack
A headphone or a line input jack of an external device (via
stereo mini-jack cable) can be connected to this jack.
s
OUTPUT LEVEL button
These buttons adjust the output sound level of the built-in
speaker or the /LINE OUT jack.
During adjustment, a volume indicator will be displayed in a
During adjustment, a volume indicator will be displayed in a
pull-up window.
d
Wi-Fi button
Use this button to turn on/off the Wi-Fi function.
Right side panel
f
EXT IN switch
Set the gain for the EXT MIC/LINE IN jack and whether
phantom power is on or off.
CAUTION
• Confirm that phantom power is OFF before connecting a
line-level device to the EXT MIC/LINE IN connector. If you
connect a line-level device while phantom power is being
supplied, that device and this unit could be damaged.
• Do not connect or disconnect mics when the phantom
power switch is set to ON. Doing so could cause a loud noise
and might damage this unit and connected equipment.
• Turn phantom power ON only when using a condenser
microphone that requires phantom power. Turning
phantom power on when a dynamic mic or other mic that
does not require it is connected could damage this unit and
connected equipment.
• When using condenser mics that require phantom power
and dynamic mics together, be sure to use balanced
dynamic mics. Unbalanced dynamic mics cannot be used
when phantom power is enabled.
• Supplying phantom power to some ribbon mics could break
them. If you are unsure, do not supply phantom power to a
ribbon mic.
• When using USB bus power, the unit might not be able to
supply phantom power depending on the computer. If this
occurs, use the included AC adapter (GPE053B).
• Some condenser microphones will not operate when
phantom power is set to +24V.
• Do not connect or disconnect the AC adapter when using
phantom power. Doing so could cause the unit to turn off
even when batteries are installed in it. This can result in
recording data being damaged or lost.