Tascam DR-44WL オーナーマニュアル

22 

Correct a time delay that occurs when the built-in microphones 

are far away from an external microphone.
1.  Press the INPUT button to show the 

INPUT

 

SETTING

 

screen.

2.  Press a TRACK/INPUT button to open the 

INPUT 

SETTING

 screen for that channel (track) to set its 

DELAY

 item.

3.  Using the wheel select (highlight) 

DELAY

 and press the 

ENTER/MARK or / button.

INPUT

 

SETTING

 screen Tr1 display when in 4CH mode

4.  Use the wheel to set a value according to the distance of the 

connected microphone.
Options:  

0ms

 

(0m)

 (default value) to 

300ms

 

(103m)

 

5.  Press the ENTER/MARK button to confirm the setting and 

enable selection of other setting items.

6.  Once the setting has been completed, press the 8/HOME 

button to return to the Home screen.

The low-cut filter can reduce noise such as offensive wind noise 

from air-conditioners and projectors.
1.  Press the INPUT button to show the 

INPUT

 

SETTING

 

screen.

2.  Press a TRACK/INPUT button to open the 

INPUT 

SETTING

 screen for that channel (track) to set its 

low-cut filter.

3.  Using the wheel select (highlight) 

LOW

 

CUT

 and press the 

ENTER/MARK or / button.

INPUT

 

SETTING

 screen Tr1 display when in 4CH mode

4.  Use the wheel to set the cut-off frequency of the low-cut 

filter.
Options:  

OFF

 (default value), 

40Hz

, 

80Hz

, 

120Hz

, 

220Hz

 

5.  Press the ENTER/MARK button to confirm the setting and 

enable selection of other setting items.

6.  Once the setting has been completed, press the 8/HOME 

button to return to the Home screen.

LOW

CUT