Tascam DR-44WL オーナーマニュアル

44 

Use the track bounce (ping-pong recording) function to 

combine recorded tracks 1 - 4 into one track.
This function allows you to record on tracks 1 - 2 after mixing 

down tracks 1 - 4 (stereo bounce) or to record on track 1 by 

mono mixing tracks 1 - 4 (mono bounce).

Track 1

Drum L

Track 3

Bass

(can be 

overwritten)

Tracks 1–4 are mixed down to stereo

and bounced to tracks 1–2

Track 2

Drum R

Track 4
Guitar

Track 3

Bass

Track 1 and 2

Drums, Bass,

Guitar

Track 4

Guitar

(can be 

overwritten)

Track 1 and 2

Drums, Bass,

Guitar

Track 3

Lead

Guitar

Track 4

Lead

Vocal

New recordings can be 
made to tracks 3–4

When recorded on the playback track itself, the original 

playback track is naturally cleared (the drum part in Track 1 - 2 is 

overwritten in the illustration above).

1.  Set the mode to 

MTR

 mode. (See “Selecting Operation 

2.  On the 

SONG

 screen, load songs in which you want to 

bounce tracks. (See “Loading Songs” on page 34.)

3.  Press TRACK/INPUT for the track you want to use as bounce 

destination and make TRACK/INPUT blink.
Among tracks selected as bounce destinations, the left 

channel of the mixed-down stereo source will overwrite 

the odd track and the right channel will overwrite the even 

track.

4.  Press MIXER to open the Mixer screen and adjust 

PAN

 

knob and the 

LEVEL

 knob for each track. (See “Setting 

For mono bounce to odd-numbered track, set the 

PAN

 

knob to 

L12

. For mono bounce to even-numbered track, 

set the 

PAN

 knob to 

R12

.

Adjust the overall level with the master level knob.

5.  When the Mixer screen is open, press MIXER to return to the 

Home screen.

6.  When playback is stopped or paused or when playing back, 

press QUICK to open the QUICK pop-up menu.

7.  Using the wheel, select (highlight) 

PLAY

 

FUNCTION

 

and press ENTER/MARK button.
The 

PLAY

 

FUNCTION

 screen is displayed.

8.  Set the IN and OUT points of bounce as the loop playback 

section. (See “Repeated Playback of Selection (Loop 

00:00:00

9.  Press 8/HOME button to return to the Home screen, and 

press QUICK to open the QUICK pop-up menu.

10.  Using the wheel, select (highlight) 

BOUNCE

 and press the 

ENTER/MARK button.
The following confirmation message will pop-up:

11.  Press ENTER/MARK button to start track bounce and return 

to the Home screen after bouncing.
Press the 8/HOME button to return to the Home screen 

without track bouncing.

Lift the 

LEVEL

 knob for the track at the bounce destination 

and the master level knob (set the 

LEVEL

 knob for other 

tracks to minimum) to play back.
After bouncing tracks, you can record again (overdub) to the 

bounced tracks