Tascam DR-44WL オーナーマニュアル
DR-44WL
2
TASCAM DR-44WL
Adding marks manually during playback
Press the ENTER/MARK button during playback to add a mark at that position.
The number of the added mark will be shown on a pull-up at the bottom of
The number of the added mark will be shown on a pull-up at the bottom of
the display.
Clearing specified marks
Pause at the position of a mark. Then, press the ENTER/MARK button to clear
that mark.
Adding marks automatically when the PEAK
indicator lights
The unit can add marks automatically when the PEAK indicator lights during
recording.
1. Press the MENU button to open the
1. Press the MENU button to open the
MENU
Screen.
2. Use the wheel to select
AUTO FUNCTION
, and press the ENTER/
MARK or / button.
The
The
AUTO FUNCTION
screen opens.
3. Use the wheel to select the
PEAK MARK
item under
AUTO MARK
,
and press the ENTER/MARK or / button.
4. Use the wheel to turn the
PEAK MARK
function
ON
.
Options:
OFF
(default),
ON
5. Press the ENTER/MARK button to confirm the setting and reenable
setting item selection.
6. When finished making the setting, press the 8/HOME button to return
to the Home Screen.
NOTE
•
Marks are added two seconds before a PEAK indicator lights.
•
For 10 seconds after a mark is added because a PEAK indicator lit,
no other mark will be added if the PEAK indicator lights again or an
automatic mark would normally be added according to the
LEVEL
setting.
•
Marks added because of a PEAK indicator lighting will not cause
division when the automatic division function is used.
Setting the mark skip mode
Multiple types of marks can be added to files (
MANUAL
,
LEVEL
,
TIME
and
PEAK
). With this function, you can set what type of mark to use when
moving between them.
1. Press the MENU button to open the
1. Press the MENU button to open the
MENU
Screen.
2. Use the wheel to select
SYSTEM
, and press the ENTER/MARK or /
button.
The
The
SYSTEM
screen opens.
3. Use the wheel to select
MARK SKIP MODE
, and press the ENTER/
MARK or / button.
4. Use the wheel to set the mark skip mode.
Options
ALL
(default): Move between all marks
MANUAL
: Move between marks added manually
LEVEL
: Move between marks added using the automatic mark
function
LEVEL
setting
TIME
: Move between marks added using the automatic mark
function
TIME
setting
PEAK
: Move between marks added when a PEAK indicator lit
OFF
: Do not move between marks
5. Press the ENTER/MARK button to confirm the setting and reenable
setting item selection.
6. When finished making the setting, press the 8/HOME button to return
to the Home Screen.