Tascam BD-01U オーナーマニュアル

ページ / 61
EN
31
@Caution
• 
Do not remove the USB flash drive or switch the unit to 
the standby mode while the contents of the drive are 
being accessed. It may result in malfunction or loss of 
the drive’s data.
• 
TEAC cannot be held responsible if your USB flash drive 
is not supported, nor will TEAC accept any liability for 
damage or loss of stored data.
• 
If you connect SD card or USB flash drive via USB card 
reader or USB hub, BD-ROM data will be write onto the 
first connected card or device. Connecting a USB flash 
drive directly to this unit is recommended.
• 
Do not use the USB port on this unit to charge the 
battery on a USB device.
@Note
• 
The resume information will be cleared when;
 
[ C (stop)] is pressed while in the Resume-On-Stop 
mode.
 
- the USB flash drive is removed.
 
- the unit is switched to standby mode.
• 
Do not delete the folders or files in the USB flash drive 
with your computer. This unit may not read USB flash 
drives formatted on a computer.
• 
If a folder or file name includes one of the following 
unrecognizable characters, the folder or file name may 
not be displayed correctly.
 
- Unrecognizable characters: 
. , “ = + [ ] ; / \ : | ¥
• 
This unit can read MP3 / WMA / WAV / JPEG files and 
AVCHD on an SD card by using USB card reader / USB 
hub (not supplied).
 Using the Title / Disc / Pop-up Menu
 
 
Some BD-videos, DVD-videos or AVCHD files may contain a 
title menu which describes the contents of the disc, or a disc 
menu which guides you through the available functions in 
the disc.
With such discs, a title menu or a disc menu may appear 
automatically when you insert the disc. Otherwise, press 
[TOP MENU] or [POP UP/MENU] to call up the menu. Refer 
to the disc’s manual on how to navigate through the menu.
@Note
• 
Menus vary among discs. Refer to the information 
accompanying the disc for details.
• 
[TOP MENU] or [POP UP/MENU] may not work with 
some discs.