Dbx DriveRack 260 オーナーマニュアル

DriveRack

®

Section 1

The backlit LCD display of the DriveRack 260 provides the user with all of the vital processing 
information of the DriveRack 260 including: signal routing, effect block editing and Wizard 
Setup functions. The display will also notify the user if any internal clipping is taking place 
within the unit  by displaying “CLIP” in the display.

The Data wheel of the DriveRack 260 is used to scroll through the program menu, load 
programs, select parameters and edit parameter values. 

The function buttons of the DriveRack 260 allow direct access to all editing and navigating 
functions of the DriveRack 260. See sections 2.1 and 2.2 for a detailed description on the 
functions of each of these buttons.

The DriveRack 260 provides the user with two independent, six segment Lightpipe™ input 
meters that range from -30 to +22 dBu. These meters monitor the signal level right after the 
input module.

The threshold meters indicate that the threshold level has been exceeded within the Limiter or 
Auto Gain Control sections, and gain reduction may be taking place within the specific output 
channel.

The six output mute buttons are used for independently muting each output on all six outputs 
of the DriveRack 260.

The DriveRack 260 provides the user with six independent six-segment Lightpipe™ output 
meters that range from -30 to +22 dBu.