Dbx DriveRack 260 オーナーマニュアル

DriveRack

®

Section 7

This Application guide section is provided to offer suggested installation applications of the  
DriveRack 260 that will allow you to optimize peak performance of the processor. Note that 
the six included applications represent the extensive flexibility of the DriveRack units. These 
applications can be used verbatim, or as sample reference guide templates for designing 
countless audio applications.

 

1.  Connect the outputs from the mixer to the inputs of the DriveRack. 
2.  Connect the outputs of the DriveRack and run to the selected speaker amplifier.
3.  Making sure that all outputs are muted, apply power to the mixer and amplifiers.
4.  Make connections between the Zone Controllers (see Section 6.2) and the 260.

1.  Select a program (Factory: 2x4 w/ 2 Zones) as a template.
2.  Load the program by pressing the PROG/CONFIG button.
3.  Adjust the individual parameters for the system by pressing the Processing  Module 

buttons. 

4.  

Using the Utility Menu, select the ID for each ZC-1 and ZC-2 Zone Controller and 
program its output level boost and cut parameters. 

JBL AE Series
ASB 6128

2

4

3

5

JBL AE Series
AC2215/64

Zone B
Cry Room

JBL Control 26C
Ceiling Speaker

Zone A
Lobby

JBL Control 26C
Ceiling Speaker

dbx ZC-1

dbx ZC-2