PreSonus FaderPort™ 8 オーナーマニュアル

8

2.2 

1.  Channel Name and Level. Displays the Channel name and current fader level.
2.  Metering. Displays the channel metering. This can be turned on or off by 

pressing SHIFT plus the push button encoder in the Session Navigator.

3.  Pan Position. Displays the Channel’s current pan position.
4.  Pan/Param. Controls panning for the currently selected 

channel. Push to set the pan position back to center.

5.  Select Button. This button selects the corresponding channel in Studio One and 

changes color to match the channel color codes you have chosen in your session.

6.  Solo. Isolates the corresponding channel’s output signal 

in the mix. Press and hold to solo momentarily.

7.  Mute. Mutes the corresponding channel’s output 

signal. Press and hold to mute momentarily.

8.  Touch-Sensitive Fader. This 100 mm motorized fader can be used to control 

volume levels, aux send levels, panning, or plug-in parameters, depending on 
mode. See Section 2.6 for more information. 
 
 
 
 
 
 
 
 

2.2.1 

Arm. Pressing the Arm button will allow you to arm track for recording by pressing 
the corresponding track’s Select button. 
 

Arm All. Press Shift + Arm to arm all tracks for recording. 
 

Macro. Press to open the Channel Editor macro controls for the Selected channel on 
your FaderPort. 
 

Solo and Mute Clear. These buttons will clear all solos or mutes. 
 
 
 
 

Shift + Macro. Press Shift + Macro to open/toggle the FX insert window for the 
Selected Channel in Studio One.