PreSonus FaderPort™ 8 オーナーマニュアル

17

3.6  

The 8 faders on the FaderPort 8 can be used to set levels, control plug-
in parameters, set send levels, and panning for every track.

1.  Track. When Track mode is active, the motorized faders will display and 

control channel levels. Press Shift and Track simultaneously to display 
Timecode on the scribble strips. See Section 3.6.4 for more information.

2.  Edit Plug-ins. When Edit Plug-ins mode is active, the motorized faders 

will control the parameter settings. The scribble strip will display the 
parameter each fader controls. See Section 3.6.1 for more information.

3.  Sends. When Sends mode is active, the motorized faders will control the 

send levels for the selected channel. See Section 3.6.2 for more information.

4.  Pan. When Pan mode is active, the motorized faders will display 

and control channel pan. When not active, the Pan/Param knob to 
the left of the scribble strips controls the panning for the currently 
selected channel. See Section 3.6.3 for more information.

3.6.1 

While working in HUI mode in ProTools, engaging Edit Plug-ins will allow 
Faders and Select buttons 1-4 to control the parameters and switches 
of the focused plug-in. The scribble strip above each fader will display 
the parameter that the fader and Select button are controlling.
Use the Pan/Parameter encoder to page through the parameters of the focused 
plug-in. 
 
 

Press the Link button to switch to Assign Plug-ins mode. This will display the first 4 
inserts of the selected channel on the scribble strips. Use the Pan/Parameter encoder 
to page through Inserts 5-8.
If no plug-in is focused, you will see “Press Insert Select of channel” displayed.
To insert a new plug-in:

1.  Press the Shift button. Every Select button will turn yellow. 
2.  Press the yellow Select button to enable a channel’s Insert Switch. 

You will see the name of the channel after pressing Select. Use 
the Session Navigator to bank or scroll to other channels. 

3.  Press Shift again to exit and view the channel’s inserts.
4.  If a plug-in is assigned to an insert slot, the corresponding 

Select button will be teal. Press the Select button to edit.

5.  If an insert slot is empty, move the corresponding fader. 

This will scroll through the list of available plug-ins. 

6.  Press the Select button to load the desired plug-in into the insert slot. 

Press the Bypass button to bypass the focused plug-in.