Wet Sounds WW-BT-VC (Version 2) オーナーマニュアル
Installation Instructions:
Surface Mount Instructions:
Flush Mount Instructions:
Drill a 7/8" hole. Unscrew the locking nut on the back of the device
and pull apart. Slide the unit thru the hole and attach the nut on the
back side.
and pull apart. Slide the unit thru the hole and attach the nut on the
back side.
Note: You can adjust the orientation of the knob in either of
the two mounting positions by loosening the nut on the back
side and rotating the knob to a different position. Example,
the mark can either be at 12, 3, 6 & 9 o'clock position.
the two mounting positions by loosening the nut on the back
side and rotating the knob to a different position. Example,
the mark can either be at 12, 3, 6 & 9 o'clock position.
Skip one track back
t4LJQPOFUSBDLCBDL
Adjust volume UP
t5VSOBOEIPMEUIFLOPCDMPDLXJTF
Adjust volume DOWN
t5VSOBOEIPMEUIFLOPCDPVOUFSDMPDLXJTF
tHook the red wire to 12volt +
t)PPLUIFCMBDLXJSFUPWPMU
tInsert a 3.5 mm audio cable into the back of the device and connect
to your source or amplifier.
t)PPLUIFCMBDLXJSFUPWPMU
tInsert a 3.5 mm audio cable into the back of the device and connect
to your source or amplifier.
Use the 2 Phillips screws to mount
Operation Instructions:
Play music
(Some phones may require you to start a media player
first)
t5BQUIFLOPCPODF.
Pause music
Skip one track forward
t5BQUIFLOPCUPQBVTF
BOEUBQBHBJOUPSFTVNFQMBZJOH
t5VSOUIFLOPCDMPDLXJTF
Instruction
Duration
5BQ
5VSO
Approx: 1 second
Press briefly
5VSO and hold
Approx: 3 seconds
Bluetooth® device is connected to phones using a procedure called
QBJSJOH#ZGPMMPXJOHBGFXTJNQMFTUFQT
BQIPOFDBOFBTJMZCF
QBJSFEXJUIUIF88#57$
QBJSFEXJUIUIF88#57$
Follow your phones instruction guide for Bluetooth® pairing. First
NBLFTVSFUIBU#MVFUPPUIJTBDUJWBUFEPOZPVSNPCJMFQIPOF5IFO
TFUZPVSQIPOFUPEJTDPWFSUIF#MVFUPPUIEFWJDF5IJTVTVBMMZ
JOWPMWFTHPJOHUPTFUUJOHT DPOOFDUPS#MVFUPPUINFOVPOZPVS
phone and selecting the option to discover or add a Bluetooth
TFUZPVSQIPOFUPEJTDPWFSUIF#MVFUPPUIEFWJDF5IJTVTVBMMZ
JOWPMWFTHPJOHUPTFUUJOHT DPOOFDUPS#MVFUPPUINFOVPOZPVS
phone and selecting the option to discover or add a Bluetooth
device. Your phone will find the Bluetooth® receiver under the
OBNF88#57$"GUFSTFMFDUJOH88#57$ZPVSQIPOFXJMM
confirm when pairing is complete.
confirm when pairing is complete.
1. Press the knob and hold until you see red and blue LED
lights blinking . At this time, it gets into pair status.
lights blinking . At this time, it gets into pair status.
2. Set your Bluetooth phone to search for the Bluetooth®
device (WW-BT-VC).
device (WW-BT-VC).
The WW-BT-VC is easy to operate. One knob performs different
functions depending on how long you turn and hold it:
functions depending on how long you turn and hold it:
1
2