Sony Cyber-shot® DSC-RX1R II オーナーマニュアル

GB

• If the charge lamp on the camera flashes when the AC Adaptor is connected to the 

wall outlet (wall socket), this indicates that charging is temporarily stopped because 
the temperature is outside the recommended range. When the temperature gets back 
within the appropriate range, the charging resumes. We recommend charging the 
battery pack in an ambient temperature of between 10°C to 30°C (50ºF to 86ºF).

• Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If 

malfunctions occur while using the AC Adaptor, disconnect the plug from the wall 
outlet (wall socket) immediately to disconnect from the power source.

• When the camera is being used for the first time or when you use a battery pack that 

has not been used for a long time, the charge lamp/CHARGE lamp may flash 
quickly when the battery is charged for the first time. If that happens, remove the 
battery pack from the camera and then re-insert it to recharge.

• Do not continuously or repeatedly charge the battery without using it if it is already 

fully charged or close to fully charged. Doing so may cause a deterioration in battery 
performance.

• When charging is finished, disconnect the AC Adaptor from the wall outlet (wall 

socket).

• Be sure to use only genuine Sony brand battery packs, micro USB cable (supplied) 

and AC Adaptor (supplied).

The charging time is approximately 155 min. using the AC Adaptor 
(supplied) with the battery charger (supplied), and approximately 150 min. 
using the AC Adaptor with the camera.

• The above charging time applies when charging a fully depleted battery pack at a 

temperature of 25°C (77°F). Charging may take longer depending on conditions of 
use and circumstances.