Canon Speedlite 430EX III-RT オーナーマニュアル
56
a: Fully Automatic Wireless Flash Shooting
5
Set the flash mode to <
a
>.
Press the <
E
> button of the
<S> cross keys of the master unit.
Turn <9> to select <Q>, then
press <8>.
press <8>.
The slave unit is set automatically to
<a> during shooting via the
control from the master unit.
<a> during shooting via the
control from the master unit.
Check that the firing group control is
set to <8>.
set to <8>.
6
Check the transmission status
and charge status.
and charge status.
Check that the <D> lamp is lit in
green.
green.
When the slave flash is ready, the AF-
assist beam emitter blinks at approx.
1-second intervals.
assist beam emitter blinks at approx.
1-second intervals.
Check that the <Q> slave flash-ready
icon is lit on the master unit’s LCD
panel (<G> is not displayed).
icon is lit on the master unit’s LCD
panel (<G> is not displayed).
For the master unit’s LCD panel
illumination, see page 54.
illumination, see page 54.
Check that the master unit’s flash-
ready lamp is lit.
ready lamp is lit.
7
Check the performance.
Press the master unit’s test flash button.
X
The slave unit fires. If it does not fire,
check that it is placed within the
transmission range (p.46).
check that it is placed within the
transmission range (p.46).
8
Take the picture.
Set the camera and take the picture
in the same way as with normal flash
shooting.
in the same way as with normal flash
shooting.
Slave flash ready
Firing group control