Nikon SB-700 AF Speedlight オーナーマニュアル
H–3
Tips on Speedlight Care and Reference Information
H
Warning indicators
Warning indicator
Cause
Solution
0
Battery power weak
indicator appears.
indicator appears.
All operations have
stopped due to low
battery power.
stopped due to low
battery power.
Replace the
batteries.
batteries.
B-10
Thermal cut-out
indicator appears.
indicator appears.
All operations have
been suspended
because the SB-700
has overheated
and could become
damaged.
been suspended
because the SB-700
has overheated
and could become
damaged.
Allow the SB-700 to
cool down.
cool down.
E-31
Safety circuit activation
indicator appears.
indicator appears.
All functions other
than the power
switch are inoperable
because of power
abnormalities.
than the power
switch are inoperable
because of power
abnormalities.
Turn off the power,
remove the batteries,
and contact your
retailer or Nikon
representative.
remove the batteries,
and contact your
retailer or Nikon
representative.
—
The ash-ready
indicator blinks after
ring.
indicator blinks after
ring.
Underexposure may
have occurred.
have occurred.
Use a wider aperture
or move the ash
unit closer to the
subject and reshoot.
or move the ash
unit closer to the
subject and reshoot.
C-5
C-15
D-28
D-28
The remote ash unit
beeps for approx.
3 seconds.
beeps for approx.
3 seconds.
Underexposure may
have occurred.
have occurred.
Use a wider
aperture, move the
ash unit closer
to the subject or
change the position
of the ash unit and
reshoot.
aperture, move the
ash unit closer
to the subject or
change the position
of the ash unit and
reshoot.
D-28
Troubleshooting