DJI Osmo Mobile オーナーマニュアル

Osmo Mobile User Manual

Charging/Upgrade Port

Trigger

Zoom Control

#MJOLJOH1BUUFSO

%FTDSJQUJPOT

— Solid

Green

5IF0TNP.PCJMFJTGVODUJPOJOHOPSNBMMZPSmSNXBSF
upgrade successful.

Blinks Green

The Osmo Mobile is initializing / Exiting sleep mode

Slow Pulsing Green

Standby

— Solid

Yellow

The trigger is being held down and the gimbal is in Lock Mode

Blinks Yellow

The gimbal is not functioning normally.

Slow Pulsing Green/
Yellow/Red

Charging

Blinks Red Slowly

Low battery level warning

Blinks Red Quickly

Critical low battery level warning

— Solid

Red

/PO%+*CBUUFSZEFUFDUFEPSmSNXBSFVQHSBEFGBJMFE

Tap twice on the trigger to re-center your phone. If the system status LED blinks
yellow, it indicates an error in the gimbal.

[7] Trigger

Hold down the Trigger to enable Lock Mode. The gimbal will stay in its current position
regardless of handle movement. The Osmo Mobile will return to SmoothTrack Mode once
the Trigger is released.

Quickly tap the Trigger twice to center the mobile phone.

Tap three times on the trigger to switch between your phone's front and rear camera.
Switching cameras during video recording will stop the recording.

Hold down the trigger and push the joystick up and down to zoom. This function is
available in the DJI GO app metering mode and when using your phone's rear camera
only. Currently available on iOS only.

[8] Charging/Upgrade Port

To charge the Osmo Mobile by connecting to this port.