Yamaha R-N803 オーナーマニュアル

New firmware that provides additional features or product improvements will be released as needed. If the unit is 
connected to the Internet, you can download the firmware via the network and update it.

You can also update the firmware using the USB memory device 
from the “ADVANCED SETUP” menu (p. 53).

Use the cursor keys (B / C) to select 
“Network” and press ENTER.

Use the cursor keys (B / C) to select 
“Information” and press ENTER.
If new firmware is available, “NEW FW Available” 
appears on the front display.

Use the cursor keys (B / C) to select 
“Update” and press ENTER.

To start the firmware update, press ENTER.
The unit to restart and the firmware update starts.

To cancel the operation without updating the firmware, press 
SETUP.

If “UPDATE SUCCESS” appears on the front 
display, press A (power) on the front panel.

The firmware update is complete.

■

When new firmware is available on the network, “NEW 
FW” will be displayed on the front display for a short 
period of time when the unit is turned on. 

To update the firmware, press ENTER (as described in 
Step 6) while the notification is displayed. If “UPDATE 
SUCCESS” appears on the front display, press A (power) 
on the front panel to turn off the unit.

• Do not operate the unit or disconnect the power cable or network cable during firmware update. Firmware update takes about 5 

minutes or more (depending on your Internet connection speed).

• If the unit is connected to the wireless network via a wireless network adapter, network update may not be possible depending on 

the condition of the wireless connection. In this case, update the firmware using the USB memory device (p. 53).

B / C

Available

NEW FW

Perform Update

UPDATE

Update [ENTER]

NEW FW