Zvox SoundBase 570 オーナーマニュアル
1. Speaker placement
You can place the SoundBase on any flat, stable surface near your TV. If the TV base is small
enough, you can place the SoundBase system on a piece of furniture and then place the TV
on top of the SoundBase.
enough, you can place the SoundBase system on a piece of furniture and then place the TV
on top of the SoundBase.
• Consider the surface that will support the SoundBase. It is the SoundBase owner’s
responsibility to insure that a furniture finish is unaffected by supporting the combined
weight of a SoundBase and possibly a TV. Place an appropriate barrier between the surface
and the feet of the SoundBase if you are in doubt. The four support pads on the bottom of
a SoundBase are a soft, inert synthetic material that does not react with typical furniture
finishes. But some furniture finishes can be deformed or altered by having any heavy
object resting on them for a long period of time. ZVOX Audio, Inc. cannot be responsible
for any change in the appearance of any supporting surface finish that may occur after a
SoundBase is placed upon the surface.
weight of a SoundBase and possibly a TV. Place an appropriate barrier between the surface
and the feet of the SoundBase if you are in doubt. The four support pads on the bottom of
a SoundBase are a soft, inert synthetic material that does not react with typical furniture
finishes. But some furniture finishes can be deformed or altered by having any heavy
object resting on them for a long period of time. ZVOX Audio, Inc. cannot be responsible
for any change in the appearance of any supporting surface finish that may occur after a
SoundBase is placed upon the surface.
• A safe installation is the SoundBase owner’s responsibility.
• Use an unswitched AC outlet to provide power to a SoundBase. If Auto Standby is turned
on, a SoundBase will always enter its Standby state after 30 minutes of inactivity. A
SoundBase uses less than 0.5 watt in Standby. Use of a switched AC outlet to cut off AC
power to a SoundBase system may erase user preferences and delays subsequent turn-on.
SoundBase uses less than 0.5 watt in Standby. Use of a switched AC outlet to cut off AC
power to a SoundBase system may erase user preferences and delays subsequent turn-on.
• A TV heavier than 140 lbs (64 kg) should not be placed directly on top of a SoundBase 870
and 770.
• A TV heavier than 120 lbs (55 kg) should not be placed directly on top of a SoundBase 670.
• A TV heavier than 110 lbs (50 kg) should not be placed directly on top of a SoundBase 570.
• A flat panel TV has a high center of gravity. Please confirm the furnishing supporting
your TV and the SoundBase is stable and secure. The surface supporting the SoundBase/
TV combination should not move in any direction.
TV combination should not move in any direction.
• All TV manufacturers recommend that a flat panel TV be anchored to a secure vertical
surface with a tether. This prevents a household accident from causing a TV to fall off its
supporting surface. ZVOX Audio recommends you heed this recommendation and all other
installation recommendations made by the TV manufacturer.
supporting surface. ZVOX Audio recommends you heed this recommendation and all other
installation recommendations made by the TV manufacturer.
2. Connecting your TV to the SoundBase
Almost all HDTVs have an audio output, which you can connect to your SoundBase. You
should not disconnect or change any video program source connected to your TV.
should not disconnect or change any video program source connected to your TV.
TV Optical Output
ZVOX Optical Input
Optical Cable
Optical Digital Output
Almost all HDTVs use an optical digital audio output, which you connect to the Soundbase’s
optical #1 using an optical cable.
optical #1 using an optical cable.
Simple Setup – Just Four Steps
1 2 3 4
Connect the
SoundBase
to your TV
and/or audio
devices.
Learn the
features and
controls of the
ZVOX system.
“Teach” the SoundBase
to respond to your
preferred remote
controls commands
(Volume/Mute/Power).
Place the
SoundBase.