Zvox SoundBase 570 オーナーマニュアル

The VOLUME buttons on the SoundBase remote control operate in 
the normal manner.

The Power button on the SoundBase remote control toggles the 
SoundBase between STANDBY and On. Note: A SoundBase will 
automatically enter STANDBY if the selected input is silent for longer 
than approximately 30 minutes.

A SoundBase in STANDBY will automatically turn back on if it senses 
a volume adjustment or power command from the “learned” remote 
control or the SoundBase remote control.

The MUTE button on the SoundBase remote control operates in 
the normal manner. When MUTE is active, the display will show a 
blinking -00- for 20 seconds.

The Bass control has a range of -4 to 4.

The Treble control has a range of -4 to 4.

Note: The bass output of a SoundBase system is affected by its 
position within a room. You may find it sounds best with slightly more or 
less bass than the neutral setting.

There are three SURROUND levels:

•  Surround One (“Sd 1”) has low virtual surround effect and strong 

vocals. Use this setting if vocal clarity is important to you.

•  Surround Two (“Sd 2”) has moderate virtual surround effect  

and moderate vocals. Most people prefer this setting for most 
program material. 

•  Surround Three (“Sd 3”) has strong virtual surround effect  

and moderate vocals. Many people prefer this setting when 
watching movies.

Press this button to prevent large changes in volume. When engaged, 
it boosts quiet dialog and lowers the output of loud commercial breaks. 
It also reduces volume swings between cable or satellite channels. This 
feature can be used along with any of the three Surround settings.

Press this button to increase the clarity of most voices.

Pressing Accuvoice overrides the current Surround setting. A second 
press returns the SoundBase to the last-used Surround setting.

Learning:
You can “teach” the SoundBase to respond to your  
current TV remote control for the following functions:  
Volume, Mute (on/off) and Power (on/off). See the separate 
sheet for instructions. After this “learning” process, you  
will not need the SoundBase remote control for adjusting 
Volume, Mute and Power. Teaching the SoundBase to  
respond to your preferred remote does not affect the  
included SoundBase remote. The SoundBase remote will 
still provide its full range of adjustments.

Input Selection:
Pressing the INPUT button allows you to select a different 
input. Inputs are selected in the following order:

Input 1—digital (optical jack) 

Input 2—digital (optical jack) 

Input 3—digital (coaxial jack) 

Input 4—analog (RCA jacks) 

Input 5—analog (RCA jacks) 

Input 6—analog (front minijack) 

Bluetooth device