Zvox SoundBar SB500 オーナーマニュアル

You can place the soundbar on any flat, stable surface near your TV.
There are three general placement options, illustrated above:

You can place the soundbar on a flat surface so it faces forward. This 
placement is ideal for a shelf below, above or near the television.

You can place the soundbar facing up—often in front of the television. The 
bottom of the soundbar should face the listening area. Check to ensure 
the soundbar does not block the television infrared remote sensor. There 
should be no shelf or flat surface immediately above the soundbar in this 
configuration.

The soundbar has two sturdy keyhole-shaped hanger mounts on the back 
panel. You can hang the soundbar on two screwheads that are securely 
installed in a wall or other vertical surface.

• If you have a powered subwoofer you wish to use with this soundbar, the subwoofer 

connection guide is located on the last panel of this document.

• Consider the 

finish of the surface that will support the soundbar. It is the soundbar owner's 

responsibility to insure that a surface finish that contacts the soundbar is protected, 
should this be a concern of the soundbar owner. The contact area on the soundbar is 
made of inert synthetic materials that typically do not react with furniture or wall finishes. But 
any wall or surface finish can be altered by having any heavy object resting on it for a long 
period of time. Place an appropriate barrier between any surface and the soundbar if you 
are concerned about the finish of the supporting surface. 

•  A safe, secure installation is the soundbar owner’s responsibility. 

•  Use an unswitched AC outlet to provide power to the soundbar. With the soundbar's Auto 

Standby feature turned on, the soundbar enters its low-power draw standby state after 20 to 
30 minutes of inactivity. A soundbar uses less than 0.5 watt in Standby. Using a switched AC 
outlet to cut off AC power to a soundbar system is not recommended. It delays subsequent 
turn-on.

•  Do not place any objects on top of a soundbar.

All current TVs have an audio output. It is likely that one of the cables provided with the 
soundbar can be used to connect the TV audio output to an input on the soundbar. DO NOT 
disconnect any video program source connected to your TV (like a cable or satellite set top box, 
DVD/Bluray or similar).

Optical Digital Audio Output Jack (see above image) 

Most HDTVs have an optical digital audio output jack. Use the provided optical cable to connect 
the TV’s output jack to optical input 1 on the soundbar.

',*,7$/

$8',2

287

+'0,

+'0,

9,'(2