Nikon Coolpix SQ ユーザーガイド
VAA12201-R.3581.A
- A13 ・ SQ -
11. MAIN PCB
①
Attach the main PCB
・
Attach the shield gasket (#191) on the CR
base plate.(ref.Fig.1)
・
Bend the swivelling harness to avoid
touching the connector part.(ref. Fig.2)
・
As shown in Fig.2, arrange each harness
(
AV, swivelling,
Swivelling
SW, speaker, and
TFT) and each PC(CF, SW, swivelling,
CR, and TFT).
・
Align the connector of the main PCB and
that of the power source PCB to assem-
ble the main PCB.
Note)Be careful of pinched wires
(arrangement state) at 3 positions when
assembling.(ref. Fig.2)
・
Attach with 2 screws (#822).
#822×2
Main PCB
Be careful of pinched
wires (arrangement state)
AV
harness
Swivelling harness
CF FPC
Swivelling SW wire
TFT FPC
CR connection FPC
TFT harness
Fig.2
Speaker
wire
Swivelling FPC
SW FPC
Approx. 1mm
Rear cover
CR base plate
#191
#191
Connector
Connector of the power
source base plate