Nikon Coolpix SQ ユーザーガイド

VAA12201-R.3581.A

- A19 ･ SQ -

15. TOP/BOTTOM LENS UNIT COVER

・

From a position parallel to the camera body, rotate the lens unit through 90°forwards.

・

Assemble the protector with the both-sided adhesive tape (#175 and #557) attached.

（ref. Fig.1）

・

Assemble the bottom lens unit cover.

Note）Be careful not to damage FPC when assembling.

・

Assemble the top lens unit cover, and attach 4 screws (#807).

・

Push the top and bottom lens unit covers so that the clearance

between them becomes approx. 2 mm.

Then screw #804.

（

ref. Fig.2）

・

Attach the protection glass (G8) with the retaining ring.

・

Attach the 2 both-sided adhesive tapes (#550) and one tape

(#551) to the lens unit.

・

Insert the belt (#518) until its 2 parts are hooked on to

the lens unit.

・

When replacing the main PCB or lens-barrel unit

take a note of the 2 figures

on the seal that is attached to the

lens-barrel.

（

For the usage of adjusting the lens back.）

-10 +30

030107

0000

KSN 1

Fig.1

#557

#175

Protector

G8 Retaining ring

#807×4

Top lens unit cover

Bottom lens unit cover

Push

Clearance

approx. 2 mm

Fig.2

Screw (#804)

Figures at 2 parts

Seal

Hook×2

Lens-barrel of RP

Figures at 2 parts

#804